Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Drives and Lower Units (https://www.offshoreonly.com/forums/drives-lower-units-217/)
-   -   SSM template (https://www.offshoreonly.com/forums/drives-lower-units/369980-ssm-template.html)

Coleman231 01-11-2021 12:10 PM

SSM template
 
Hello all,
I read one or two people may have made a template for hanging ssm drives on a side by side twin setup.. Any chance somebody would rent a set or know who has them. Looking to get my stuff hung asap so I can figure out motor height and get this project finished.
thanks.
https://cimg7.ibsrv.net/gimg/www.off...e8f0ab26f3.jpg

Unlimited jd 01-11-2021 03:35 PM

I emailed the guy I loaned mine out to. Hopefully he gets back to me. I asked him if hed ship it to you

Coleman231 01-12-2021 11:01 AM


Originally Posted by Unlimited jd (Post 4772740)
I emailed the guy I loaned mine out to. Hopefully he gets back to me. I asked him if hed ship it to you

Thanks so much. Be nice to have for knowing everything is square and level.. really appreciate it.. ill cover shipping if I need to! Thanks again for tge help!

Coleman231 01-14-2021 10:57 PM


Originally Posted by Unlimited jd (Post 4772740)
I emailed the guy I loaned mine out to. Hopefully he gets back to me. I asked him if hed ship it to you

If you shoot me the guys email or number in direct message ill hit him up and try to get his attention on this 😁😁😁

Ironmanwb 01-18-2021 10:51 AM

Shipping out today boys!!!! Thank you for the help. It works perfect to get the holes straight.

Coleman231 01-18-2021 10:58 AM


Originally Posted by Ironmanwb (Post 4773749)
Shipping out today boys!!!! Thank you for the help. It works perfect to get the holes straight.

Awesome, I appreciate it so much!!! We will get them marked and holes cut as soon as they arrive so I can get them out to whomever needs them or back to the owner.
again, really appreciate ya sending them, ready to get this boat rigged!!

Ironmanwb 01-18-2021 12:55 PM

We traced a gasket to get the holes cut. This jig is to drill the holes so they are straight. We cut the holes for the drives small then ground them in so we knew that they would be perfect.


All times are GMT -5. The time now is 06:24 AM.


Copyright 2021 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.