Bravo to bellhousing install kit oring question
 

Question pertains to pn 16755Q-1.

The oring that goes around the oil passage, what part number is that? I have a new water passage and shift oring, but not the oil passage. Is it #4 in the parts fiche? If not I’ll buy the whole kit and go from there.
https://cimg8.ibsrv.net/gimg/www.off...bf9279e3b3.png
https://cimg0.ibsrv.net/gimg/www.off...2601ea83e.jpeg

The oil passage O ring is the one you have in pic. It should come in the 16775Q1 kit

Edited

i didn’t buy the kit. The other two orings came with the drive after rebuild, and I noticed the oil passage oring was missing on the bell housing. I pulled the drive last fall, so probably fell off and I didn’t notice. So just need the oil passage o ring, which, if #4 is it, I happen to have 2 of in my stash of parts.

#4 is correct

ok, thanks for the help