Bravo XR Sportmaster upper to lower studs
 

I am putting together a Bravo XR upper with a SportMaster standard length lower, and one of the 4.25" studs has damaged threads and I need to find a replacement... I've found the part # online but is about $50 for one damn stud, which I'll buy if needed but curious if anyone has sourced one online somewhere cheaper or if anyone has a spare they'd be willing to let go? if so please PM me with you price shipped to NJ-08731. Otherwise like I said curious if there's anywhere else that might carry it... 4.25" long, 7/16 stud with coarse threads on one side, and fine threads on the other. Looks like the pic below, but not as long.
Part# is 841024001

Thanks in advance









https://cimg2.ibsrv.net/gimg/www.off...d231651c42.jpg

Can't you just get the corrct die and rethread it

I dont think so. I can add a picture later, but.....
There was a nut frozen on the old one from when someone else removed it.... When the nut broke free finally it removed a bunch of material unfortunately.

Check McMaster-carr https://www.mcmaster.com/

I'll check if I have some that length in my shop.

that was one of the places I checked... They have a 5" in 7/16 but coarse thread only, which probably could work... BUT it's not stainless steel. In stainless they have nothing in 7/16 unfortunately.

https://www.mcmaster.com/products/th...-ends-studs-5/


Thanks 253, appreciate that.

Id call some of the drive shops if cant find one

Good idea... Appreciate it. $50 seems ridiculous for a stud.... I;d rather buy a brand new drive before $50 for a stud, LOL!

I checked my repair shop, I don't have those, sorry

Thanks for checking sir!!

Did you check with ARP or ask them if they would make you one?

I just checked out their website, haven't found anything yet, but made me think, do you really need a stud or can you just run a ARP bolt? Or not preferred?