Offshoreonly.com - Vessel View Compatibility?

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- Electronics (https://www.offshoreonly.com/forums/electronics-291/)

- - Vessel View Compatibility? (https://www.offshoreonly.com/forums/electronics/340821-vessel-view-compatibility.html)

bsboss

08-30-2016 05:48 PM

Vessel View Compatibility?

Thinking about a repower this winter, I currently have 2012 Twin Mercury Racing 300XS's and have the Race Edition Vessel View. If I go with the new 400R's, which is DTS, can I still use my Vessel View? I think the part number for mine is 898277K14.

Double Rigged

08-30-2016 08:29 PM

Yes it will work fine. There is no replacement for the race view units or software that was used on them with the new units.

bsboss

08-31-2016 12:01 PM

Thanks

rsess

09-21-2016 05:20 PM

I have raceview on 525 Efis. Is the switch to vessel view 7 or 5 just plug and play or do I need cables and adaptor My dash is tight for space. Is the vv7 same size as raceview

Taboma

09-22-2016 04:18 PM

Just plug and play. No need for the Mercury gateway with the 5 or 7. The 7 is much larger though. I would keep the Race View over the 5, though.

drejustice

09-26-2016 10:10 AM

Quote:

Originally Posted by bsboss (Post 4476812)

If you do upgrade to the 400s, make sure you re-evaluate your steering system. I've had a few significant challenges with mine that caused a true "pucker" moment. Some resolved but not 100%

All times are GMT -5. The time now is 06:34 PM.