Offshoreonly.com - Tranducer location on a stepped hull Donzi?

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- Electronics (https://www.offshoreonly.com/forums/electronics-291/)

- - Tranducer location on a stepped hull Donzi? (https://www.offshoreonly.com/forums/electronics/343654-tranducer-location-stepped-hull-donzi.html)

Cignificant

01-03-2017 12:15 PM

Tranducer location on a stepped hull Donzi?

I've decided to use an in-hull transducer for my Garmin 547XS. Any suggestions on a mounting location? Mid-hull, towards the stern, before or after one of the steps?

Sydwayz

01-03-2017 12:31 PM

Quote:

Originally Posted by Cignificant (Post 4515560)

I've decided to use an in-hull transducer for my Garmin 547XS. Any suggestions on a mounting location? Mid-hull, towards the stern, before or after one of the steps?

Steve,
If you can get access forward of the first step, this would be best. This way you know when you are creeping up on shallow water when beaching or the like. I do not believe the bottom of the hulls are cored on your boat.

Wilks

01-03-2017 08:26 PM

Behind the steps will not work on plane. Hull is very thick and will not shoot through without drilling into

rcarroll

11-19-2020 07:52 PM

Bringing back from the dead. Where did you end up mounting the transducer?

All times are GMT -5. The time now is 04:21 AM.