Originally Posted by Mauryloomis (Post 4664838)

VoodooRob - My Scarab was setup with the GO7 and Fusion Apollo MS-RA770, worked great but the GO7 didn't allow control of the XM module, so had to use the Fusion remote for that or cell phone ap. The 43V has the older Kenwood marine unit that you have with the same remote controller in the dash. Did you get the Kenwood working with the Simrad, given that it's not NMEA connected? Just curious is there's some sort of adapter? Might not worry about it since there is a controller on the dash already AND the Simrad cannot control XM. Will have to see how the Kenwood sounds, it's new to me. The Fusion was a killer setup, with the remotes all NMEA they could display data from the Simrad (speed, etc.) eliminating the need for additional smaller Simrads in the headrests or on the passenger dash area, etc. Also loved the multi ZONE features of the Fusion units to control the volume separate in the cabin, driver, and back seat area. Boat electronics and congurations had really come a long way! I'll be adding a lot of LED lighting functionality to the 43 as well as CZONE control of some of the existing and new LED/etc. switching.




https://cimg6.ibsrv.net/gimg/www.off...e67ec07fe0.jpg


https://cimg9.ibsrv.net/gimg/www.off...bde668b871.jpg



https://cimg7.ibsrv.net/gimg/www.off...ad8c4ddde9.jpg

https://cimg5.ibsrv.net/gimg/www.off...59f59828ed.jpg