Mobile vessel view
Does anyone use this? How do you like it? Eventually I want to put a MFD in but till then I am thinking about a panel mounted iPad and the vessel view. To my understanding it will give me all the engine instruments, some how fuel quantity, speed, etc. is this what I’m thinking it is or am I off?
thanks y’all |
Originally Posted by Iflylow57
(Post 4722454)
Does anyone use this? How do you like it? Eventually I want to put a MFD in but till then I am thinking about a panel mounted iPad and the vessel view. To my understanding it will give me all the engine instruments, some how fuel quantity, speed, etc. is this what I’m thinking it is or am I off?
thanks y’all Have not tested it with the engine running yet but I think it will be perfect. I can get all the fault codes in the VesselView application and much more data like the engine instruments, fuel, speed, rpm etc. Here is a picture of my panel on my Chris Craft 260 Stinger I finished last week. https://cimg2.ibsrv.net/gimg/www.off...2d669fc50.jpeg https://cimg4.ibsrv.net/gimg/www.off...2614c748e.jpeg |
Awesome let me know what you think after you fire it up!
|
|
Originally Posted by Blueabyss
(Post 4722896)
https://www.offshoreonly.com/forums/...ssel-view.html |
I have it and it works great. The fuel quantity from the way I understand it so far is a calculation. If you put 10 gallons in then you tell vessel view you put 10 gallons in and it will calculate what you have left by the fuel flow. Seems to be working so far. Thinking I need the gateway to my simrad to make the fuel quantity work. The panel is crazy simple now. I had gauges all over the place before.
https://cimg1.ibsrv.net/gimg/www.off...693b4e2e90.jpg |
Originally Posted by Gunradd
(Post 4726658)
I have it and it works great. The fuel quantity from the way I understand it so far is a calculation. If you put 10 gallons in then you tell vessel view you put 10 gallons in and it will calculate what you have left by the fuel flow. Seems to be working so far. Thinking I need the gateway to my simrad to make the fuel quantity work. The panel is crazy simple now. I had gauges all over the place before.
https://cimg1.ibsrv.net/gimg/www.off...693b4e2e90.jpg |
Originally Posted by 30outlaw
(Post 4726662)
I would go with the vessel view link vs. the gateway, then you will get the vessel view interface on the simrad vs. the simrad generic gauges...
|
im in the process of going digital on my gauges .I have a 34 Fountain with triple 300xs at the moment on simrads. I purchased the gateway ( not knowing any better) but have read that the vessel view link is way better The gateway seems very generic and plain.. any advice is appreciated.. also where is the best place to purchase the vessel view link multi engine from?? thanks
|
Originally Posted by speeder4life
(Post 4751148)
im in the process of going digital on my gauges .I have a 34 Fountain with triple 300xs at the moment on simrads. I purchased the gateway ( not knowing any better) but have read that the vessel view link is way better The gateway seems very generic and plain.. any advice is appreciated.. also where is the best place to purchase the vessel view link multi engine from?? thanks
https://embed.widencdn.net/pdf/plus/...b.pdf?u=orhjei |
All times are GMT -5. The time now is 06:12 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.