Gauges
 

What gauges are folks using besides Livorsi? I have a Cigarette and looking for other options. Thanks

I see a lot of people who are using Autometer

Autometer makes Livorsi...

I have Gaffrig Performance and they seem to work well. Most of my gauges are original on my 1998 boat and still look like new.

Vdo

If you switch to Auto Meter, you will have to switch senders also.

IMO, you buy new gauges, buy senders.

I am also replacing gauges in my Eliminator, I thought I was set on Livorsi. Until I realized that Their tachs or Speedos Dont have hour meters built in, I dont have enough room to have a gauge hole just for a separate hr meter. But Autometers have hr meters in tachs and Speedometers.

My guess is yours is an older boat or you don't want to bother with setting up NMEA 2000 and the Livorsi Vantage View gage wont work for you? I was doing some research for gage displays that would work for my application and came across them.

What gauges do you guys find you require on a large 24ft boat ?

Ive looked at those as well, I can run them and i was surprised to find out they dont really cost that much more than a standard tach,I wasnt too crazy about how the tachs numbers were laid out because of the display but like that it will display voltage and would free up a gauge spot or two

other than standard oil press,water temp, speedo , tach , fuel level it depends on whats done to boat. if you modified anything water pickup related you might want a water pressure gauge, if you have an electric fuel pump/ aftermarket fuel system might want fuel pressure, I like to have Oil Temp Also. also on fuel or oil pressure always use electric gauges, you dont want to be running oil or fuel at the helm