Offshoreonly.com - 525 EFI Engine Side Smartcraft Connector Short

I ordered the 525 Diagnostic and Service manuals and their the wrong set. Not sure why they needed my engine serial number to order the incorrect ones. Anyways, I digress. I believe I have the correct ones on order however there a week or more out and Memorial Day is getting close. Does anyone have an image of the diagram they could send me in the meantime (Serial #0M950124)? With all keys off I have a power to the red/blk wire to the3 pin connector that supply's the Smartcraft 10pin connector. Also, I under normal operation I believe that's a 5v wire and yet I'm reading full battery voltage. The other in the same state reads 0V. I'm trying to find out where that wire goes so I can see if its shorted, if it has diode is inline and failed or connected wrong. Thank in advance for any help with this!