daytona sensors Coil mount
 

Hello All,

Tried searching for the answer but came up short. I am wondering how/ where others have mounted their Coils from Daytona sensors. I have the CD1 box on a mounting plate behind the Cyl Head. Just not sure where to put the coil. Any ideas or example would be appreciated.
thx,
Tom

I made a vertical plate to mount the box, coil and capacitor
https://cimg8.ibsrv.net/gimg/www.off...28b0c27869.jpg

nice....thanks!

https://cimg7.ibsrv.net/gimg/www.off...9bb222e3b.jpeg
https://cimg9.ibsrv.net/gimg/www.off...3dd5e2514.jpeg
https://cimg0.ibsrv.net/gimg/www.off...07e99b387.jpeg

I then mounted this on the back of the head..... Local fabricator made me two of these for like 60 bucks....

Actually, thinking back on it, I bought the lower mounts on line that go on the head and had the local guy fab the 90* pieces I added to the top.

https://cimg6.ibsrv.net/gimg/www.off...ed7b410a9.jpeg

made mine on a plasma cutter
https://cimg3.ibsrv.net/gimg/www.off...8982f5ad43.jpg

the problem with mounting that ignition box vertically is that those little rubber isolators are not designed to support that much weight especially the pounding a boat takes.

excellent pics guys. I now have an idea on moving forward. Thank you!

https://cimg7.ibsrv.net/gimg/www.off...53809ba7fb.png
This is how our coil is mounted to our ignition box bracket

Hadn't thought of that. Been a couple seasons but I'm going to check them. Luckily I'm a fair weather boater that drives like a grandmother....

I mounted my box on the transom so it wouldn't have to endure the engine vibration and put the coil on a plate that had my old MSD coil on the back of the even bank cylinder head. 3rd season and no issues.

I mounted my box and coil on the transom. This is where they will see less impact and jarring. Same place I mounted my ECU's now that I went with EFI.

https://cimg3.ibsrv.net/gimg/www.off...8e7e6dbfdf.jpg