27 Daytona Prop
#1
Registered
Thread Starter
Join Date: May 2001
Location: Buckey, AZ
Posts: 120
Likes: 0
Received 0 Likes
on
0 Posts
27 Daytona Prop
Has anyone tried a Herings 5 blade on a 27 Daytona? Ive got a 07 with a 850hp blower motor, thinking about trying one just curious if anyone had and what results they had gotten.
Last edited by Cat-n-Around; 07-22-2008 at 03:28 PM.
#3
Registered
Platinum Member
Join Date: Jul 2006
Location: Rochester, NY
Posts: 610
Likes: 0
Received 0 Likes
on
0 Posts
If you're running a six, nxt or something a bit more hearty than an XR design - rock on.
Just my 2 cents.
#5
Platinum Member
Platinum Member
Join Date: Oct 2003
Location: Townsville Australia
Posts: 778
Likes: 0
Received 0 Likes
on
0 Posts
I ran a labbed 33 Maximus and stock 32 Maximus.Didn't like them,felt bogged down.The best setup is 34 stock Bravo,2" shorty,propshaft level with the lowest point of the sponsons.890hp blower motor,1:27 lower.This felt the best,remembering i race it.Trouble with it is i was 103 and on the limiter @ 5800 with a fair bit left.Tried going down 1 1/2" but didn't like it.Now have a 1/2" spacer,still with the 34,on the limiter @ 106.Racing again in 3 weeks and going to practice with a 36 Bravo.XR and shorty have been great.Last race for the Eliminator though,into another boat.Hope this helps.
#6
Registered
Thread Starter
Join Date: May 2001
Location: Buckey, AZ
Posts: 120
Likes: 0
Received 0 Likes
on
0 Posts
#7
Registered
Thread Starter
Join Date: May 2001
Location: Buckey, AZ
Posts: 120
Likes: 0
Received 0 Likes
on
0 Posts
I ran a labbed 33 Maximus and stock 32 Maximus.Didn't like them,felt bogged down.The best setup is 34 stock Bravo,2" shorty,propshaft level with the lowest point of the sponsons.890hp blower motor,1:27 lower.This felt the best,remembering i race it.Trouble with it is i was 103 and on the limiter @ 5800 with a fair bit left.Tried going down 1 1/2" but didn't like it.Now have a 1/2" spacer,still with the 34,on the limiter @ 106.Racing again in 3 weeks and going to practice with a 36 Bravo.XR and shorty have been great.Last race for the Eliminator though,into another boat.Hope this helps.
#8
Platinum Member
Platinum Member
Join Date: Oct 2003
Location: Townsville Australia
Posts: 778
Likes: 0
Received 0 Likes
on
0 Posts
#9
Registered
Thread Starter
Join Date: May 2001
Location: Buckey, AZ
Posts: 120
Likes: 0
Received 0 Likes
on
0 Posts
Feels good, diffenetly faster but it is a little hard to get on plan, I have to keep the rpms around 3000 and let it roll over. With the 1" shorty I didnt have any issues. Ratio is 1.35 and a IMCO SC, prop is a bravo-1 32 labbed.
Last edited by Cat-n-Around; 09-04-2008 at 03:46 PM.
#10
Registered
Join Date: Mar 2008
Location: Tulsa, OK
Posts: 183
Likes: 0
Received 0 Likes
on
0 Posts
26 Icc
Running a 29 hydro 4 blade with a Bmax poker run. Boat seems to be setup perfect, but MIGHT use a little more top end. Currently at 116 mph with a 950 HP Beck motor. Cant get er to throw much of a roost though, lol....
Last edited by Yellow_ICC_OK; 09-04-2008 at 10:14 AM.