changing plugs on 27 with twins
 

what is the trick to get to the outboard plugs with twin big blocks?
I've been hanging upside down in the bilge for hours.
I think a 2" ratchet extension may be the trick but I can't get the socket on the extension with 2 fingers.

'91 daytona 27

Thanks for any tips

Midgets?

I remember vividly. I layed stomach down on the top of the motor and reached around the exhaust manifolds. I used a universal joint on the ratchet. I have long arms and did it by feel and with a mirror. It took several weeks for the bruises to go away.

the trick is pain. If it doesnt hurt your not getting it out! take your time it sucks.

I have a 90 27 w/twin blwn bbc with msd and a nickerson performance I run 125 hrs on a set of plugs and change them when I freshen up the bowers and hate doing it then !

Pull the motors....lol

i had a 1990 27 daytona i took out the back set to do it it had 540 blown 871 on bravos boxes 2 inch imcos it went 130 at 6500 rpm man that boat was fun i miss it cause it pulled like a drag boat