Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Eliminator (https://www.offshoreonly.com/forums/eliminator-35/)
-   -   140 in older Daytona 33? (https://www.offshoreonly.com/forums/eliminator/200671-140-older-daytona-33-a.html)

stormbauer 12-27-2008 02:32 PM

140 in older Daytona 33?
 
Looking to get to 140 mph in my 1999 Daytona 33? What power do I need to get here?

MJT 12-27-2008 07:28 PM

I had a 99 33 Daytona that Hadley Performance Marine built a pair of 598's with 14's and chillers. The boat would run in the low 140's.

stormbauer 12-27-2008 10:47 PM

What type of power were they making? What drives were you running? Thanks for insite!

MJT 12-28-2008 11:12 AM


Originally Posted by stormbauer (Post 2766210)
What type of power were they making? What drives were you running? Thanks for insite!

Dyno at 1020hp and 1050lbs of torque, drives were xr bravo at 1.25, merc 36" props or labbed 34" (both 4 blade). Ran the boat with 2" imco shorties but performed the best at standard drives with 36's. The acceleration on this boat was unreal. The 33 I owned was a single step bottom which was achallenge in itself. The person you need to talk to is on this forum under khadley very good with the set up on these 33's (power,drives and etc.). This is the same boat that fastboats has for sale in florida.

RunninHotRacing163.1 12-29-2008 09:59 AM


Originally Posted by stormbauer (Post 2766005)
Looking to get to 140 mph in my 1999 Daytona 33? What power do I need to get here?

1150s and 138 BIG Daddy , that monster tab and porpouise on those 33s will hurt the slip #s:ernaehrung004:




she ran 112.8 out of the box with 500 hps,

Adrenaline Junkie 12-29-2008 10:05 AM


Originally Posted by MJT (Post 2766349)
Dyno at 1020hp and 1050lbs of torque, drives were xr bravo at 1.25, merc 36" props or labbed 34" (both 4 blade). Ran the boat with 2" imco shorties but performed the best at standard drives with 36's. The acceleration on this boat was unreal. The 33 I owned was a single step bottom which was achallenge in itself. The person you need to talk to is on this forum under khadley very good with the set up on these 33's (power,drives and etc.). This is the same boat that fastboats has for sale in florida.

Wow! I'm surprised you needed that much heat to see 140mph. In my 36 I've seen 124mph with 625 HP's....I was thinking that 900hp would get a 33 around the 140 mark. Must be that ny newer 36 hull (with more steps) is a bit more efficient than the 99 hull.

RunninHotRacing163.1 12-29-2008 10:27 AM

Wow! I'm surprised you needed that much heat to see 140mph :eek:


Scott 128 mph was the best with 1000s and Imco sc drives , and after Eliminator in Mira loma rolled her over and redid the bottum and added the inserts :ernaehrung004: did you get the tab on yet ????????????????????//

Adrenaline Junkie 12-29-2008 05:19 PM


Originally Posted by RunninHotRacing158 (Post 2766810)
Wow! I'm surprised you needed that much heat to see 140mph :eek:


Scott 128 mph was the best with 1000s and Imco sc drives , and after Eliminator in Mira loma rolled her over and redid the bottum and added the inserts :ernaehrung004: did you get the tab on yet ????????????????????//

RunningHOT -if your'e referring to me - my 36 came to me with the tab - and yes I do use it.

B BOATER 01-27-2009 09:56 PM

FYI Runnin hot new 33's dont have an air tab nor do they need one. Noticed that you love to bash Eliminator as much as possible. no popoise 139mph 700 mercs. not saying there wasnt a porpoise problem to begin with but the hulls have changed since you had your issue.

Ptufaro 01-28-2009 10:45 AM

new 33's dont have an air tab nor do they need one. 139mph 700 mercs. [/QUOTE]

What gear ratio and props are you running?
do you have a new 33 w/ 700 mercs?
sounds like a good mph for that package.


All times are GMT -5. The time now is 01:23 PM.


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.