Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Eliminator (https://www.offshoreonly.com/forums/eliminator-35/)
-   -   looking for a 22 or 23 dayonta (https://www.offshoreonly.com/forums/eliminator/222713-looking-22-23-dayonta.html)

aaronmt 01-13-2010 04:13 PM

looking for a 22 or 23 dayonta
 
Wanting 1990 and newer with single outboard in 22 or single outboard in 23 or injected I/O.Interior doesnt need to be perfect but must have a very good hull.Please email with what ya may have or know of thanks [email protected]

Baja 2008 01-14-2010 07:44 PM

Cumberland marine has a nice 1990 24 with a 950 hp blower motor. I looked at the boat and it is very nice for the age and a good price.

aaronmt 01-14-2010 09:42 PM

Thanks, but that might be just a bit much boat for us though.Really need to stay around 22,23 would be a tuff for where I have to store my boat.Keep the ideas comeing guys.Thanks Aaron

J.P. 01-16-2010 01:49 PM

There was an 89' 23 Daytona Black and Red Orange gel with 454 bravo drive on ScreamandFly.

aaronmt 01-16-2010 10:41 PM

Thanks,ive see that one.I want to stick with injected if im going big block.I may be open to other types of bats as well im looking for something that could be still considerd a "FAMILY".Our allison is a family boat but just a bit small for us.I like the idea of the older mod-v eliminator edge but would prefer a small cuddy if were going that way.Any idea what hulls are light as well as have a pad that can run into the 80s without a blower?

2Slow4me 01-16-2010 11:02 PM

I think Lavey Craft made something very similar, as well as Cougar boats.

The cougar is a direct looking copy of the Eliminator, and is also very well built.

?? Have you driven any of the 21' or 22' Daytona's??

I had a Hydrostream V King, similar to your allison, and currently run a 20'7" Eliminatore with a pad 454 Magnum CMI Bravo drive 28" bravo, amazing boat, but I love the look on a pickle fork

aaronmt 01-16-2010 11:49 PM

Ive been in a 22 cougar with twin 280s,it definatly ran strong.I just dont want 260s or 280s id like a single 300xs.Our allison is a grandsport and runs mid to high 90s.Id be happy running in the 80s.Big block boats drink the fuel when you add power.I have a very good friend that builds alot of race motors,so thats not the prob its the fuel im worried about.

aaronmt 01-20-2010 02:13 PM

Trying to stay way from the blackhawk drive.I know there faster just worried bout parts.

neil450 01-21-2010 04:08 PM

i have never had any probloms getting parts mater fact my black hawk is being redone right now by ECM only hard thing is props but some say once you drive a 22 daytona with the BH u wont want to go back to brovo low HP with high speed they handle complety differnt they are strait up bad ass set ups


All times are GMT -5. The time now is 05:17 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.