33 Daytona Build - The Red Rocket !!
 

One of our fellow OSO members is building a new 33' Daytona. Let's follow the build as it progresses...:ernaehrung004:

First off, prep the molds:

They are cleaned and then Mold Wax is applied...slippery stuff.
http://www.performanceboats.com/gall...4/molds_01.jpg

Temps have been quite cold for a few days, sold the molds are wrapped, patiently waiting to head to the spray booth.
http://www.performanceboats.com/gall...4/molds_02.jpg

Molds have been in the spray booth Thu & Fri:

Hull goes first, with the bottom getting an extra thick coating of R-14:
http://www.performanceboats.com/gall...4/base_red.jpg

Clear goes first, following by House of Kolor II Icy Red:
http://www.performanceboats.com/gall...94/pearls_.jpg

Then comes the R-14 full coat:
http://www.performanceboats.com/gall...edium/red1.jpg

In the final stages now:

Red is checked for cover:
http://www.performanceboats.com/gall...edium/red2.jpg

The final coat is ALWAYS black: Helps w/air bubbles in lamination, and is that "tell-tell" when things possibly happen in the future.
Of course, we never damage our hulls, right?
http://www.performanceboats.com/gall...ack_final_.jpg

That's it, piece of cake...

Deck Mold is next on Monday, if not tomorrow/Saturday...

Laying it down...

http://www.performanceboats.com/gall.../spray_red.gif

Looking forward to seeing this out of the mold. What power?

BIG POWER customs with #6's...

Started the lam on the hull Sat...2-3 day process...spray the deck on Monday...
[ATTACH=CONFIG]534664[/ATTACH]

Update!
 

Final stages of lamination....should pop out next week....!!!

Popped it out on Monday...

http://www.performanceboats.com/gall...229_124546.jpg

http://www.performanceboats.com/gall...229_125057.jpg

Looking good!

I send Eliminator an email yesterday with some questions. Hopefully it went to right email account. Its [email protected]. That still their email?

That is one bad looking Mutha!!