Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Excalibur (https://www.offshoreonly.com/forums/excalibur-125/)
-   -   Refinished 27 Flatdeck (https://www.offshoreonly.com/forums/excalibur/106618-refinished-27-flatdeck.html)

OVERKILL 54 06-28-2005 09:45 PM

Refinished 27 Flatdeck
 
3 Attachment(s)
Just thought I'd post a few pix of the project boat I bought last fall.

OVERKILL 54 06-28-2005 09:49 PM

Re: Refinished 27 Flatdeck
 
3 Attachment(s)
Here's a few more

OVERKILL 54 06-28-2005 09:55 PM

Re: Refinished 27 Flatdeck
 
3 Attachment(s)
A few more.

David 06-29-2005 04:46 AM

Re: Refinished 27 Flatdeck
 
Lookin good :drink: What power?

OVERKILL 54 06-29-2005 06:07 AM

Re: Refinished 27 Flatdeck
 
powered with original 454 (330 hp.)
runs 60 mph. on gps. I have plans for a bigger motor but with only about three months of boating weather around here, I'm going to wait until winter to do the work.

David 06-29-2005 07:38 AM

Re: Refinished 27 Flatdeck
 

Originally Posted by OVERKILL 54
I have plans for a bigger motor but with only about three months of boating weather around here, I'm going to wait until winter to do the work.

I hear ya there. You get the winter weather before anyone else. I left Michigan in 1988. Been there, done that. :(

Stormrider 06-29-2005 08:10 AM

Re: Refinished 27 Flatdeck
 
Nice job.
Nothing as cool as old school.

spk1 06-30-2005 02:11 PM

Re: Refinished 27 Flatdeck
 

Originally Posted by OVERKILL 54
powered with original 454 (330 hp.)
runs 60 mph. on gps. I have plans for a bigger motor but with only about three months of boating weather around here, I'm going to wait until winter to do the work.

I see you have original 454's, I had a question about those engines, I have a 40' Hawk with the 454 mercruisers borg trans and TRS drives, Does any one know if those are Standard Rotation Engines, Or Reverse? thanks guys,

David 07-01-2005 03:47 PM

Re: Refinished 27 Flatdeck
 
If you look at the timing tab on each engine, and they are the same, most likely you have standard rotation engines. Reverse rotation engine has a different tab, as the damper (harmonic balancer) would be rotating the opposite direction. Or, crank engine and see which way it spins. Looking at engine from the front, std rotation spins clockwise, reverse spins counter-clockwise.
The drive would also be different for reverse rotation. The prop shaft has an "R" stamped in the end for reverse rotation drives.

littledcsrodshop 07-11-2005 12:31 PM

Re: Refinished 27 Flatdeck
 
Congrats. nice looking boat! I love the wrapping paper!!!!!!!!!!!

floatingphil 07-11-2005 04:09 PM

Re: Refinished 27 Flatdeck
 
Nice job OVERKILL 54. I inquired about that boat when it was for sale in Timmins. Lots of luck with it. How's the fishing up there?
Phil

ernie davis 07-15-2005 10:21 AM

Re: Refinished 27 Flatdeck
 
Love the dog food bags "masking" :p :drink: :p

TomR 08-09-2005 05:54 PM

Re: Refinished 27 Flatdeck
 
Very Pretty Boat, Nice Job!

highdesert54 09-08-2009 12:02 PM

what size and pitch is your prop?

my 27' speedster has 454 and i can get on gps is 50
please let me know

OVERKILL 54 09-18-2009 04:59 PM

when the stock motor was in it i had a 25 p mirage. 58 on gps at 4700 it ran great at any rpm

Shaneshaller20 01-16-2023 05:46 PM

Excalibur
 

Originally Posted by OVERKILL 54 (Post 1374961)
A few more.

badass boat you got

golfmaxgolf 01-17-2023 06:30 PM

Once was a very nice boat, been kicked all 0ver socal/sonevada for years now wound up w/ a guy in a waterski puddle that Finally sold it, I believe its in the Havasu area now?


All times are GMT -5. The time now is 05:58 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.