27 Excalibur ~ Congrats TxHawk
#81
Registered
iTrader: (2)
Cleaning up little details. The tach still isn't working, using old VDO in my lap. Gaffrig is sending a fix, fingers crossed.
Anyway, some close to finished pictures. The PRP seats fit and finish will need some improvement over the winter but they work great and are very comfortable.
Anyway, some close to finished pictures. The PRP seats fit and finish will need some improvement over the winter but they work great and are very comfortable.
Last edited by TxHawk; 08-23-2016 at 02:16 PM.
#82
Registered
iTrader: (2)
Cool video from a drone. Running a little loose for the camera...
http://www.youtube.com/watch?v=snYDA6lpwJc
http://www.youtube.com/watch?v=snYDA6lpwJc
Last edited by TxHawk; 08-29-2016 at 11:57 AM.
#89
Registered
iTrader: (2)
Word is out that I am gaining some power this season as planned. The boat ran great with the 502 but was so comfortable at 60mph that I wanted to build something that would cruise at that speed. Built a 540ci 9.7:1 with CNC Brodix 320/119 heads and a proven cam from my builder. Going to run a dominator against my desire an expect to make 675+. I worked on the bottom some and cleaned up all the knicks and scratches top and bottom. I'm anxious to see what it will do. If it will turn a 30P prop at 5400 with the same slip I have now, it will be capable of running faster than what I would consider safe...
Also sitting on my spare trailer with a new full cover!
Also sitting on my spare trailer with a new full cover!