Fiberglass work in NJ
 

I am looking for a good shop that can blueprint the botom of my boat and do a few small gelcoat chip repairs.

2003 29' Kryptonite

Re: Fiberglass work in NJ
 

you could try Tony Pacheco, from Bad Boy Powerboats..he's down around Egg Harbor..give Kurt @ Kurts Marine a call for a phone number...

Re: Fiberglass work in NJ
 

If Tony isn't available, you can call me at my shop. I am On the Mullica River. Marine Specialists, LLC. The shop number is 609-748-0073 or My cell 609-709-8387. We do top quality work, if i DO say so myself. I have several boats in the shop as well as a customer ref. list I would be happy to provide.

I'm assuming you have a yellow boat with twin outboards?

Hope to hear from you,
Jim Ritchie

Re: Fiberglass work in NJ
 

Hi Jim,

I have a black and white I/O that I run out of the Barnegat area. I know the yellow one you are referring to though. The bottom of my boat is white with black sides and white deck (with red and silver trim). See avitar pic. Most of the work is in the bottom with only one chip in the black gel. I also have some stains on the deck that I don't know what to do with (tree sap, dirt). I am getting a full cover for next season!

Re: Fiberglass work in NJ
 

Fiberglass Plus in Arnolds Marina, ask for Frank.

Re: Fiberglass work in NJ
 

Tom,
I'm less than 2 mins off the GS Parkway. If you want me to take a look at it give me a call and i can schedule some time.

Do you have some damage on the bottomr?

Either way we do expert repairs as well as custom fabrication and rigging.

Jim

Re: Fiberglass work in NJ
 

Jim, there is a chip out of the edge of the step 3" x 1/4" and some small gouges where the forks picked the boat at my marina. We had a small little mishap loading it on the trailer recently, nothing major. Also, under the swim platform, the drive was over-trimmed (when I got stuck @ the Dutchmen's :mad: ) and gouged up the bottom edge (not below water-level).

Re: Fiberglass work in NJ
 

With the factory being so close why not take it back there?

Re: Fiberglass work in NJ
 

The dutchmans is rough!!!!!!!!!! Bring it on in or stop by and check out our shop. ON second thought don't bring it on in I couldn't get to it for a few weeks anyway but your welcom to stop by anytime. We TRY to close on Sundays. We currently are working on a 22 Apachi, 31 Cobra, 2 cali. skiboats and I have a triple engine 36 Cobra due in on the 15th as well as all the misc. "stuf"

Re: Fiberglass work in NJ
 

Jim I may stop by and check out the shop sometime. Got room for a 35' Cig in there before April 1st?? :D

Chris

Re: Fiberglass work in NJ
 

Sure as long as your not planning on bringing it in in the middle of March and want it back by April 1st like EVERYONE ELSE. :mad:

24 hour work days cost EXTRA$$$$$$$$ :D

But seriously, what are you looking to have done Chris?

Re: Fiberglass work in NJ
 

LOL :D I was thinking more towards last week in March - 4/1 :eek: :D ((April fools! :p )) I'll give ya my boss's # RE: 24hr work days :rolleyes: :)

Looking to get work done on on couple areas on the underside of my hull some surface scratches and cracks. Small stuff(??) really but maybe you'd be interested? I'm local (not loco), have trailer and very flexible on time to get it to you when it's convenient. Send me an email and I'll I send couple pics of what I'm looking to repair. Thanks Chris :cool: [email protected]

Re: Fiberglass work in NJ
 

I love the small stuff it distracts me from the jobs that never seem to be finished.

Just had a guy bring in a 40' Trawler <sea slug> today. I ALREADY hate that boat. :eek:

I'll get that email off to you and we'll go from there.

Re: Fiberglass work in NJ
 

Yo CAT5 .... busy?? :D :evilb:

Re: Fiberglass work in NJ
 

That is who I use.

Re: Fiberglass work in NJ
 

If your from NJ check out this tread http://www.offshoreonly.com/forums/s...d.php?t=114256

I hope I did that right.

Re: Fiberglass work in NJ
 

Bring it to Rich Sutphen Jr up in Lake Hopatcong.