Filling in transom holes
04-19-2007, 12:01 PM
#1
Registered
Thread Starter
Join Date: Sep 2006
Location: Toronto, ON
Posts: 595
Likes: 0
Received 0 Likes
on
0 Posts
Filling in transom holes
I'm looking at a one year old Baja and want to change the swim platform from fiberglass to aluminum. The hull is a dark blue. Is it a big problem to fill the old holes and have new ones drilled fo the new platform? How good is the repair usually?
Thanks.
Thanks.
04-19-2007, 01:54 PM
#2
Charter Member #232
Charter Member
Get a guy that knows his stuff and you will never know they were there. Let them take their time and let stuff cure. If they rush the job you will get srinkage (not what happens to you when you go in cold water!!! 
)
)
__________________
Put your best foot forward!
Put your best foot forward!
04-25-2007, 04:53 PM
#3
Registered
Thread Starter
Join Date: Sep 2006
Location: Toronto, ON
Posts: 595
Likes: 0
Received 0 Likes
on
0 Posts
Southern Georgian Bay. I'm considering a navy gelled Baja but would like the fiberglass platform replaced with their OEM aluminum setup, which has different mounting holes.
Platinum Member
04-27-2007, 12:05 PM
#5
Registered
Thread Starter
Join Date: Sep 2006
Location: Toronto, ON
Posts: 595
Likes: 0
Received 0 Likes
on
0 Posts
Thanks resurrected.
No worries about the time line. I'm more interested in acquiring the boat right now, and will worry about the swim platform over the winter. Just want to make sure it can be done, that's all.
No worries about the time line. I'm more interested in acquiring the boat right now, and will worry about the swim platform over the winter. Just want to make sure it can be done, that's all.
