Leverage Photo Thread
#33
Registered
Join Date: Apr 2001
Location: Petoskey, MI
Posts: 1,191
Likes: 0
Received 0 Likes
on
0 Posts
donnie, what did you use to get the vinyl clean on that cobalt? I have a winter project that is not anywhere near that bad. but bad enough that I was considering new vinyl. wow
scott
scott
#34
Registered
Thread Starter
Join Date: Sep 2006
Location: Closer than you might think..........
Posts: 1,442
Likes: 0
Received 0 Likes
on
0 Posts
Donnie
#35
Registered
Join Date: Apr 2001
Location: Petoskey, MI
Posts: 1,191
Likes: 0
Received 0 Likes
on
0 Posts
not really stained just older boat with some mildew here and there, thought about just replacing but is still in pretty good shape so I think I will try and clean first.
#37
Registered
Thread Starter
Join Date: Sep 2006
Location: Closer than you might think..........
Posts: 1,442
Likes: 0
Received 0 Likes
on
0 Posts
Hi Bryan,
Welcome to the board! I agree with you on the Eraser, but be careful about moderation. They work well, but should only be used when the staining is that bad. Always be sure to wipe with fresh water and also follow up with a Conditioner like mine. Use my Vinyl Cleaner for everyday cleaning and dirt/mildew removal. It's Vinyl/Leather safe and you won't have to worry about premature deterioration.
Donnie
Welcome to the board! I agree with you on the Eraser, but be careful about moderation. They work well, but should only be used when the staining is that bad. Always be sure to wipe with fresh water and also follow up with a Conditioner like mine. Use my Vinyl Cleaner for everyday cleaning and dirt/mildew removal. It's Vinyl/Leather safe and you won't have to worry about premature deterioration.
Donnie