ridefast77

iTrader: (5)

I am redoing my stringer set up so i can go to one gas tank every thing is going awesome next im going to move the middle bolk head up and clean the rigging up ...then my race pad and after all that im going to paint it fun fun i hope i can get done before summer comes

ridefast77

iTrader: (5)

more fun

RunninHotRacing163.1

looks like a cool lil project , how ya installin that tank ??



ROCK ON !!!!!!!!!!!!!!!!!!!
ITS A SKATER NATION !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

ridefast77

iTrader: (5)

Once i get the pad done ill side the tank in and glass the bulkhead in i am making a foam cradle for the tank then im going to put some brakets in to bolt the tank down.

272bajadriver

iTrader: (1)

Awesome job keep the pics coming!

RunninHotRacing163.1

all that work and added weight wont the CG be off on the boat ???? you should be stoked on the paint project


ROCK ON !!!!!!!!!!!!!!!!!!!!!!!!
ITS A SKATER NATION !!!!!!!!!!!!!!!!!!!!!!!!!

ridefast77

iTrader: (5)

actually I have lost weight, all the old foam was wet, the 2 old tanks were aluminum and the new one is plastic. I have cut off around 200lbs and the new tank being in the center makes the center of gravity more of a central and lower location. Allowing the boat to handle better.

throttleman

iTrader: (1)

FYI, you should not use pine plywood , need to use Douglas fur or birch to do you stringers and bulk heads . pine has oils and will rot .

outonsafari

iTrader: (4)

i'll ask cuz i don't know

where did you get the plastic tank ?

ridefast77

iTrader: (5)

A local boating wearhouse they have every thing there for boats the guy gave me this 95gal tank for $250 awesome deal