Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Fiberglass and Paint (https://www.offshoreonly.com/forums/fiberglass-paint-167/)
-   -   Wanting to build steps in my transom (https://www.offshoreonly.com/forums/fiberglass-paint/275546-wanting-build-steps-my-transom.html)

redlinecat 04-30-2012 08:21 PM

Wanting to build steps in my transom
 
Wanting to build steps in my transom between motors?
I am needing to build step or steps to make getting in boat eazier on wifey and friends after taking a swim.
http://i49.tinypic.com/23m629w.jpg
http://i48.tinypic.com/1zlfzmw.jpg
I have posted pics of transom area on boat. and inside area that i would be glassing steps to.


http://i49.tinypic.com/24gim82.jpg
Skater pic is a reference of what im wanting to build in to the transom.

I want to cut a section out of the top back area of boat and glass in steps or step.
http://i49.tinypic.com/m9yfb7.jpg

Any ideas would be great.

Thanks

redlinecat 04-30-2012 08:39 PM

Any ideas?
 
I need some help figuring something out that will flow with the lines of the transom area of boat.

Heres a few pics of boat.

Thanks
http://i50.tinypic.com/352hmdl.jpg
http://i49.tinypic.com/35ks6ds.jpg
http://i50.tinypic.com/x29xmt.jpg

glassdave 05-07-2012 08:47 PM

Careful how far down you cut into that transom. Very structural piece right there between the tunnels. You will have to make sure there is adequate knee bracing to carry the full load.


All times are GMT -5. The time now is 05:21 AM.


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.