tcwcar

iTrader: (1)

I'm thinking about painting my white gel, white paint, BC/CC, tryed to wetsand the gel and buff just to many discolorations, should I regel or paint and if paint, whos PPG, Dupont, what clear or should go with, or should i use imron, algrip or something like that....thanks for any help...joe

glassdave

iTrader: (1)

If its a single color with no graphics i would shoot single stage PPG Concept. Great stuff and after its buffed it actually looks like fresh gel. Its easy to work with and is pretty durable. I use color # DCC-91050 on all complete resprays, good lookin clean white that goes with all other colors.

scippy

iTrader: (3)

Dave......On the PPG concept single stage which # is correct...DCC-90150 -or- DCC-91050? on a differnt topic in this section you mentioned the latter one......just want to be sure.

Glassic R.T.

Pete , are you getting ready to spray the Mag at this point in time.

glassdave

iTrader: (1)

oops my bad, good catch i was pretty tired when i typed that it is 91050. Thanks




*fixed*

tcwcar

iTrader: (1)

Dave got grafics on sides, would like to use BC/CC, want your expertics on which is the best paint / clear to use, PPG clears 2002, 2021, 3000, 4000, which one or some other, Dupont????, and how durable is BC/CC on boats......

J-Bonz

iTrader: (3)

Dave,
What primer to you suggest using with the Concept paint....?

scippy

iTrader: (3)

Still aways off, but the time creeps closer as I'm just getting done with all the stringers now. Still, seems a million miles away!!

wtfo

I'd use any good quality epoxy primer and dbc color, 2021 clear... I've had good luck with this in the past...