Planning some repairs/upgrades
#41
Bought a walace aluminum gantry off craigslist, It's adjustable, portable and can be moved around fully loaded. Also works awesome for taking boats on and off trailers!
Ordered some 4"x1/2" aluminum angle and made all the motor mount brackets to the stringers with a bare block mocked up.
Ordered some 4"x1/2" aluminum angle and made all the motor mount brackets to the stringers with a bare block mocked up.
#42
Registered
Update, water pickups all mounted, steering is on, motor mounts all made and drilled, through bolted bolsters to the floor so screws stop backing out.
Next is to clean the bilge out fill some small screw holes and repaint.
Finish putting motors back together, rig all the coolers, and make backing plates for the dash panels. Hoping to be done in February or March.
Next is to clean the bilge out fill some small screw holes and repaint.
Finish putting motors back together, rig all the coolers, and make backing plates for the dash panels. Hoping to be done in February or March.
#43
Hahaha, well for full labor rate I can have yours done next week! Machine shop has to get a couple hundred stuffed in his pocket, I'll pay rent in a building for a couple weeks, and I'll put all else my boat included aside! No problem happy to do it! Btw I need $5k more k thanks lol
#44
Registered
Hahaha, well for full labor rate I can have yours done next week! Machine shop has to get a couple hundred stuffed in his pocket, I'll pay rent in a building for a couple weeks, and I'll put all else my boat included aside! No problem happy to do it! Btw I need $5k more k thanks lol