Offshoreonly.com
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Fiberglass and Paint (https://www.offshoreonly.com/forums/fiberglass-paint-167/)
-   -   Wet sanding, what am I doing wrong? (https://www.offshoreonly.com/forums/fiberglass-paint/284367-wet-sanding-what-am-i-doing-wrong.html)

VCMike 09-07-2012 07:39 PM
Originally Posted by low_psi (Post 3771993)
Too much gap between grits. You should go up in 200 grit intervals. You are seeing the deep scratches left by 600 grit....

If it were me I would never have started with 600..... Probably start at 800, then go up in 200 grit intervals until you get to 1200., then go up to 1500, then 2000.
+1. Btw that looks great, hows the arms?


All times are GMT -5. The time now is 11:44 AM.
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.