VCMike

I second(or third or fourth) everything said here except I don't let the wax sit for an hour. I wipe on, wipe off. Everyone uses their own method so see which way works best for you.

Greatlaker

Dose Aqua Buff Cut better than 3M Super Duty? I have used 3m for years but always looking for new stuff

VCMike

Aquabuff makes 3M Super Duty look like a polish, not to mention its white instead of orange/yellow so it doesnt stain dehydrated gelcoat. 3M Superduty smells like ass too

Greatlaker

I will try Aquabuff your right about 3M smell

93 shooter

what type of bonnets are best for applying and removing wax using a orbital machine,and what speed works best

thank you

VCMike

What type of orbital is it? If its a new Porter Cable/Griots/Meguiars/etc. I use LC flat blue pads. To remove I use microfiber towels.

93 shooter

i am using Porter Cable 7424XP Car Buffer and Polisher

VCMike

6" Lake Country blue or gold pads.

93 shooter

what speed should i use ?(electronic variable speed between 2,500 -- 6,800 OPM )

VCMike

Speed 3-4 is good for applying waxes and sealants.