Mirage 270 cracks in gelcoat on port side midship
#1
Registered
Thread Starter
Mirage 270 cracks in gelcoat on port side midship
Looking at a Mirage Intimidator 270 1988. Halfway down port side there is about 4 cracks in gelcoat vertically. About 10" apart.anyone now if this is common to these.There is no feeling of delamination and cracks are very shallow.
#2
Registered
Join Date: Oct 2012
Location: Cleveland, Ohio
Posts: 99
Likes: 0
Received 0 Likes
on
0 Posts
Not sure if it's common or not but what's interesting is that I sold for a Mirage dealer in '88 and Mirage had a lifetime hull warranty on their boats. Means nothing now except, at the time, they thought they really had one hell of a build.
70mph with 330's and Bravos, if I remember right. I loved the lines on that boat. Hope someone chimes in with some real help for ya.
70mph with 330's and Bravos, if I remember right. I loved the lines on that boat. Hope someone chimes in with some real help for ya.
#4
Registered
Join Date: Oct 2012
Location: Cleveland, Ohio
Posts: 99
Likes: 0
Received 0 Likes
on
0 Posts
We sold a good half dozen of these while I was there and all had big block power. Sorry, I'm not sure how 350 mags would do. I do recall it being a good riding boat in the slop. Those Intimidators were a really sharp boat in those days.
#6
Registered
Thread Starter
Just wondering I have a guy that wants to trade me for my Grand National is all .I think I might get one.