Oc12553

Anyone on here take on building a hardtop for a speedboat?
​​​​I'm in the process of it now.

Jimofstuartfl

I've built a lot of them. Whats your question?

ren3

Finishing one for my 28' center console. There is a thread on it. 70" wide 106" long. Carbon fiber cored with 1/4" Nidacore honey comb. West System epoxy. Red vinylester gelcoat on top. Clear carbon on bottom. Weighs about 30 lbs.

ren3

Got the carbon T-top finished and installed. Can't post pictures though.

resurrected

Nice!
What was your layup schedule and resin to reinforcement ratio?
Thanks Jason

ren3

5.7 carbon, about 14 glass, 1/4" Nidacore, two layers 5.7 carbon. West System epoxy hand laid as dry as reasonable. Probably 40% resin in reality. Very stiff and light for it's size. Used Melamine and molding clay for the one time mold.

resurrected

Thank you, I have a habit of overbuilding stuff

F-2 Speedy

iTrader: (6)

anyone can post pictures with over a 10 post count

ren3

I have always missed the utility.. Thanks.

ren3

And yes the GPS receiver has to be moved.