Stripping AF bottom paint
#1
Registered
Thread Starter
Join Date: Jan 2020
Location: Saint George, Maine
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Stripping AF bottom paint
I am trying to find out if there is any interest in having AF striped from any glass, wood, steel and aluminum hulls. Ive been doing it here in Maine for a couple years now and its becoming a popular item with reports back of modest increases in hull speed, reduced engine loads and even having to re pitch the prop. We use a 30-60 or 40-70 Grit recycled glass media that leaves a great surface profile for barrier coat or just AF.