Re: Here goes nothing, (357 project)
 

Rememver:

Everything will take four times longer than you expect and cost ten times more.....:drink:

Re: Here goes nothing, (357 project)
 

This is VERY TRUE!

Re: Here goes nothing, (357 project)
 

Hey Outlaw,
Did you notice the name on the side of that 357????????

Must be another badboy out there. :p

Re: Here goes nothing, (357 project)
 

give me a day or 2 I'll post pictures.

Re: Here goes nothing, (357 project)
 

speaking of the Outlaw paint on the side, its a little faded, i want to put it back on, but what is the best way to take it off?? without damaging the paint?

Re: Here goes nothing, (357 project)
 

Your outlaw sticker is painted? I had once to do same thing to change registration number aon a boat. I took a sand paper (soft) and sanded till I was down on gelcoat, then wet sanded and polished. it worked out pretty fine, but I can't tell for your boat. My registation number was hand painted without prior sanding maybe that's why it came off easily. I have not forgot about seat pictures just did not have time.

Re: Here goes nothing, (357 project)
 

Hey boomer35! Here are the pictures you wanted. Hope it helps. As you can see these are from original shape. the sides of back seat came in two piece, one each side, and the back cushion was made out of 3 piece, one for each colors. I think my pictures are too big for what oso allows...

Re: Here goes nothing, (357 project)
 

Now, I don't think pictures are too big, I'm sure! Cause it did not work! Let me know your regular e-mail adress I'll send you 6 pictures I shot tonight.

Re: Here goes nothing, (357 project)
 

have you got them in your regular mail box?