357 guys, cabin floor pics!!!
 

As of now i have no floor in the cabin, im looking for some pics to give me some ideas, should i do a snap in carpet or just staple it right to the floor i make, is there a little door to still reach the bilge right under the door?>? PICS PICS PICS

Re: 357 guys, cabin floor pics!!!
 

notta?

Re: 357 guys, cabin floor pics!!!
 

building tomorrow, going off nothing, anybody got anything, is there a step, whats the deal with the floor down there!!!

Re: 357 guys, cabin floor pics!!!
 

what do you mean ? No floor? I can take pictures of mine even though it is stripped, but can't see what you are looking for exactly!

Re: 357 guys, cabin floor pics!!!
 

im assuming there must be some sort of floor that goes over the hull or fiberglass bilge area, wondering what it looked like, if there was a step over the bilge, or how low it is from the couch ledge

Re: 357 guys, cabin floor pics!!!
 

so you mean where you walk in the cabin it's in V shape right? No flat floor?

Re: 357 guys, cabin floor pics!!!
 

boomer slow down....dont go building yet..noone even knows what ur tlaking about....what you mean NO floor?

Re: 357 guys, cabin floor pics!!!
 

yea, if you walk in the cabin, there is a bilge right under the door, then in my case, it goes right down to the white fiberglass, im thinking from the way the carpet doesnt go all the way down the side, there must have been a floor there, Jeff, is your floor in?

Re: 357 guys, cabin floor pics!!!
 

do you have any pictures? is their a cabin in your boat already? is the area unfinished without fiberglass between yur cabin and the door from the cockpit leading to the cabin? why is it not finished? areyou saying there is absolutely nooo floor there and you can seethe hull, stringers etc?

Re: 357 guys, cabin floor pics!!!
 

Boomer. I see what you mean now. I'll take pictures of mine. In fact there is a step, made out of white kind of composite/plastic thing. The top of the step can be opened since there are hinges on it, so you have access to bilge where a bilge pump is installed and the hose for overflow from the a/c ends. I'll send you pictures before the end of the day...

Re: 357 guys, cabin floor pics!!!
 

Ok, I got the pictures so I post them now. If you have questions go for it. For the hatch hinges, I have both screwed on the boat. On the hatch, I only have the one on the right side of the boat, starboard I guess in english, since on the other side, the fiberglass corner is broken and non existant, so no hinge for that side.

Re: 357 guys, cabin floor pics!!!
 

last

Re: 357 guys, cabin floor pics!!!
 

the hinges on the boat are bolted through the deck. To be able to hold the nuts, you have to take off the last vent on the back of the boat then you see them. By the inside of engine compartment the only access is by a small venting round hole where your hands probably won't go. Mines are stuck from salt water so I'll try again tonight to try send them tomorrow. Let me know for the price I may take a complete set... Thanks.

Re: 357 guys, cabin floor pics!!!
 

here are the hinges I send you tomorrow. As I said I'm missing one. They are made out of aluminum. The top holes where the hatch was attached to are now more oval than perfect cercle. I don't have the screw or pin that was used so the hatch was moving up or down. Gonna have to find one!

Re: 357 guys, cabin floor pics!!!
 

Jeff-

Thanks alot for the pics, again helped me out 110%.. Send those hinges to the address i emailed you, ill get my buddy to mock you up a set at his cost, i will PM or email you with the price before i do it, it will more thna likely be about 1/2 of the price of one hinge from formula for both, thanks again man, and send them bad boys out ASAP

Steve

Re: 357 guys, cabin floor pics!!!
 

Boomer .... is you buddy making new hinges ? If he had to build more could he ? Thanks ....m

might have jumped the gun ... I was thinking engine Hatch hinges ....

Re: 357 guys, cabin floor pics!!!
 

yes-

they are engine hatch hinges and he said he wouldnt mind making as many as he needed to, once he makes one the rest will fly, just need to pay for shipping and prolly a little extra for a weekend 12 pack

Re: 357 guys, cabin floor pics!!!
 

Sounds great ... I have a 311 but would think they are close . if not the same ... I'll get some measurements ...

Re: 357 guys, cabin floor pics!!!
 

the guy at formula told me that the hinges havent changed in 20 something yrs, all the same for every boat,.. who would have thought, cuda may know?

Re: 357 guys, cabin floor pics!!!
 

Gone today at 3 pm by Dicom Express, 1 888 463 4266, tracking 306 947 605, let me know if anything wrong!

Re: 357 guys, cabin floor pics!!!
 

Jeff-

Thanks alot man, he may have them done this weekend, ill keep you posted, jsut went to diTRAK or whatever it was, this is the shipment status, is that normal?

Missing customs document DICOM MONTREAL??

Re: 357 guys, cabin floor pics!!!
 

I know they faxed me a document to fill in and return to them wich I did right away and returned it by fax, everything should be settled they have not called back... Let me know if it takes too long.