|
Re: '07s here, I need a boat.....
I might make 3000 posts in this thread! :D
|
Re: '07s here, I need a boat.....
Originally Posted by Rippem
(Post 1981074)
absolutlely! 35' Fountain
faster the "look" excellent fit and finish tailored for those 5'11" or less split hatches are kinda nice, racy nice sized platform, closest to the water quality guages/controls/systems throughout lengendary overall performance and those azzbackwards LH controls! :eek: :D Alright!!! Thats an eight thumbs up :) , and one thumbs down/up :confused: review. |
Re: '07s here, I need a boat.....
Originally Posted by Rippem
(Post 1981091)
forget it. beat the bushes looking for them for the first red DMax. Out of business.
the pics don't do 'em justice. the nicest running boards I had ever seen. absolutely beautiful shape, quality, fit, and function they were sold over GM parts counter as a GM accessory in '01/'02 I tracked every lead...I liked 'em that much. No good. breseechevrolet.com go to the accessory store / chev / ext cab / exterior items / down to assist steps............. are these the same item? appear to be a GM item. |
Re: '07s here, I need a boat.....
I'm liking the new perk that allows for viewing my entire post so fragmentally quoted by RaggedEdge.
click the blue arrow in the quote. Nice new feature! :cool: |
Re: '07s here, I need a boat.....
Originally Posted by RaggedEdge
(Post 1981422)
Check this out.
breseechevrolet.com |
Re: '07s here, I need a boat.....
Originally Posted by Rippem
(Post 1981424)
I'm liking the new perk that allows for viewing my entire post so fragmentally quoted by RaggedEdge.
click the blue arrow in the quote. Nice new feature! :cool: |
Re: '07s here, I need a boat.....
BTW my avatar sky is more dramatic than yours.:p |
Re: '07s here, I need a boat.....
Originally Posted by RaggedEdge
(Post 1981422)
... are these the same item?
I did find something very close to the ones I had in the aftermarket. I'll see if I can dig up the vendor. Pay particular attention to how the ones on my GMC come down at the wheelwell into a molded section that then flows/rolls back into what you more commonly see as the rest of the board... the back end finished/shaped nicely too. Like I said I beat the bushes to find them. They were unique. They were unlike anything else in a 'glass board I had seen or have seen since. |
Re: '07s here, I need a boat.....
Originally Posted by Rippem
(Post 1981439)
no
I did find something very close to the ones I had in the aftermarket. I'll see if I can dig up the vendor. Pay particular attention to how the ones on my GMC come down at the wheelwell into a molded section that then flows/rolls back into what you more commonly see as the rest of the board... the back end finished/shaped nicely too. Like I said I beat the bushes to find them. They were unique. They were unlike anything else in a 'glass board I had seen or have seen since. |
Re: '07s here, I need a boat.....
1 Attachment(s)
you can see where the vendor at the time embossed GM in the front of the board. You can't see in this pic the every-other chrome topped rib on the tread...that looked really nice
I considered boards again for the '06, but I had the GM chrome over stainless bars that I bought new @ half price off ebay and took off the '04.5 when I traded it. They went through a couple winters on the last truck but are still like new, really good quality bars. I cleaned the chrome up with 00 steel wool and dish soap lube then rinse before I put them on the '06. Not a chip, flake, or rust spot on them. |
| All times are GMT -5. The time now is 10:14 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.