ISO Formula 311 SR-1 color white?
 

Please let me know if you have painted your Formula SR-1 hatches or other parts white and what color did you use to match the hull.

Thanks

Good luck, the hull is a eggshell white,I am sure it is hard to match. I would contact formula on it.

MOE,

I'll get out the cans that I used to paint my rear seat handles, forward vents and cup holder plates. Believe it or not, it is just outdrive/outboard motor paint, since the parts are aluminum. Send you the info tonight.

Treads, will you post it up here? Thanks.

Thanks!!

Keep in mind that this is what I found to best match my 91 292. The paints were all TEMPO Marine Outboard/Sterndrive paints. First the Zinc Chromate Primer, Yellow, p/n 020420. The paint is Johnson White 1981-Present, p/n 020461. Then I used a Clear/Depth Coat p/n 020519. I was very happy with the results. This is what I used for the aluminum components. For the plastic forward grilles (just outside the aft ends of the windshiled) I used Dupli-Color Adhesion Promoter for painting plastic as the primer and then just used the Johnson White above and then the clear coat.

That looks great, have you painted any other items? I have thought about paining the side storage compartment doors white.

Items on the current project list include painting the following:

Seat Bolster supports (mak sure to mask the McCleod emblem.
All four deck hatches (inside will be painted grey to match the interior)
Rub rail and install stainless insert.

The side storage doors is a good idea as well.

I would like to paint the rub rail also and inster the stainless piece. Let me know how those go and I will also keep you posted. Using the same color for all of your to do items?

Yes, the Johnson White 81-Present. I'll keep updating the thread too.