311 SR-1 Sundeck vinyl replacement?
 

Can you take out the individual pieces of vinyl to recover them?

Yeah. Lift up the engine hatch. Remove the screws holding the mirrors in place. Under the mirrors are more screws holding the sundeck pieces in place. Remove the screws and pull out the sections.

Don

Thanks Don!
 

What would I do without you! Thanks for all the help.

Thats what were all here for. I was in your same place a couple of years ago with the 311. How did the rub rail turn out?

I'd go ahead and replace the wood with pvc board, and put in new foam if I were you. It doesn't cost that much, especially since you will have it apart anyway.

Looks good I would up load pictures but the files are over the size limit.

Download this:
http://www.microsoft.com/windowsxp/d...powertoys.mspx

Load this program. Then rick click on any picture in your folder and in the menu will be a picture resizer. Use the small format. It will resave the file in a smaller format. Its the easiest one I have found.