Need Help Taking Bezels off....Please..
Hey Guys I'm finally starting to do some things around the boat and need to know how to take the stock bezels off the gauges.I have a friend who owns a body shop,so instead of buying new gauge bezels,we are going to sand the stock ones completly smooth and paint the candy red,what do you do guys think?Also what do you like about painting the rear vents,you think Red or White???Here are a couple pics....
http://i10.photobucket.com/albums/a1...n/P4200159.jpg http://i10.photobucket.com/albums/a1...DSC00004-1.jpg http://i10.photobucket.com/albums/a1...DSC00002-1.jpg |
I think it could look cool for the dash. I would leave the vents for two reasons. One is they will likely chip being in that area were people board the boat and what not. I also think that since they are surrounded in black that they should stay that way.
Jon |
Originally Posted by Audiofn
(Post 2110179)
I also think that since they are surrounded in black that they should stay that way.
Jon |
I think chormed vents would look good it matches the windshild frame and the bow rail.:drink:
|
I'm purty sure those bezels are part of the gauge and not removable. You could take the whole thing out, tape the face of the gauges, and then shoot the bezels.
|
Where's mopower or cuda when you need um...:drink:
|
I pantied my vents white last year with krylon fusion no problems so far. Im not sure about the white on your 89 but my 86 357 is an off white so they dont quite blend . But Im going to try thr Krylon dover white it looks like it should be a real good mach. If anyone wants to know how it matches up I will post after I pant them again.
|
Originally Posted by Killer_TA
(Post 2110459)
I pantied my vents white last year with krylon fusion no problems so far. Im not sure about the white on your 89 but my 86 357 is an off white so they dont quite blend . But Im going to try thr Krylon dover white it looks like it should be a real good mach. If anyone wants to know how it matches up I will post after I pant them again.
I took that black stripe of the whole back of the boat I would like chrome vents and the ar intakes too :) |
The bezels come off, twist one way or the other and they will pop apart. I painted my vents with Krylon white and I think they look very nice. I'll try to get pics this week if it quits raining.
|
I got all the bezels off,I'll be putting a DIY up in a little bit with pics....
|
All times are GMT -5. The time now is 03:52 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.