Need Help Taking Bezels off....Please..
#1
Registered
Thread Starter
Join Date: Jan 2006
Location: Crownsville, MD
Posts: 399
Likes: 0
Received 0 Likes
on
0 Posts
Need Help Taking Bezels off....Please..
Hey Guys I'm finally starting to do some things around the boat and need to know how to take the stock bezels off the gauges.I have a friend who owns a body shop,so instead of buying new gauge bezels,we are going to sand the stock ones completly smooth and paint the candy red,what do you do guys think?Also what do you like about painting the rear vents,you think Red or White???Here are a couple pics....
#2
Charter Member #232
Charter Member
I think it could look cool for the dash. I would leave the vents for two reasons. One is they will likely chip being in that area were people board the boat and what not. I also think that since they are surrounded in black that they should stay that way.
Jon
Jon
__________________
Put your best foot forward!
Put your best foot forward!
#3
Registered
Thread Starter
Join Date: Jan 2006
Location: Crownsville, MD
Posts: 399
Likes: 0
Received 0 Likes
on
0 Posts
Ya know I was thinking that too,since it has that black strip in the rear,it might stick out like a sore thumb,I hope the dash looks good,I just don't have the money right know for new bezels and stuff....I'll let you guys know how it comes out...
#7
Registered
Join Date: Mar 2006
Location: Southington, CT
Posts: 96
Likes: 0
Received 0 Likes
on
0 Posts
I pantied my vents white last year with krylon fusion no problems so far. Im not sure about the white on your 89 but my 86 357 is an off white so they dont quite blend . But Im going to try thr Krylon dover white it looks like it should be a real good mach. If anyone wants to know how it matches up I will post after I pant them again.
#8
NO WAKE ENFORCER
Platinum Member
Join Date: Mar 2004
Location: Dayton, Oh
Posts: 1,221
Likes: 0
Received 0 Likes
on
0 Posts
I pantied my vents white last year with krylon fusion no problems so far. Im not sure about the white on your 89 but my 86 357 is an off white so they dont quite blend . But Im going to try thr Krylon dover white it looks like it should be a real good mach. If anyone wants to know how it matches up I will post after I pant them again.
I took that black stripe of the whole back of the boat
I would like chrome vents and the ar intakes too
#9
Registered
The bezels come off, twist one way or the other and they will pop apart. I painted my vents with Krylon white and I think they look very nice. I'll try to get pics this week if it quits raining.