Just blew a drive....hard to believe at only 500hp...
07-26-2007, 08:17 AM
#22
21 and 42 footers
Platinum Member
07-26-2007, 11:10 AM
#23
arneson-industries.com
Offshoreonly Advertiser
I'm assuming they get that nice rooster tail as an added bonus with these drives too. It seems planning would be more difficult and docking would be a bit(h with the props even further back but the speed increases are certainly appealing. What about costs? How many XR's do I have to break to pay for the switch-over. (I'm running 540's putting out 700lbs TQ)
Getting on plane only takes a bit more RPM
07-26-2007, 12:31 PM
#25
21 and 42 footers
Platinum Member
I was only spectulating on docking. I had shaft drive cruisers for years where the props were UNDER the boat. Compared to bravos behind the boat the cruisers wre much easier to pivot and dock.
What about costs. You've done at least 6 382 Formulas.....(what I have). Can you PM me some ball park figures on costs, I have no idea what these systems go for. We pull the motors regularly (unfortunately) so I can probably handle the install.
08-03-2007, 12:24 AM
#26
Registered
Join Date: Jul 2002
Location: LOTO / KC
Posts: 618
Likes: 0
Received 0 Likes
on
0 Posts
my 353 500efi runs labbed 30's. I have a fair amount of slippage as well.
Lost an XZ at 110 hrs, bought a reman XZ and had the orig one rebuilt for a spare. Would like to try 5 blade Maximus, as I'm sure it will reduce slip a bunch and cruise speed should increase, but I am worried about the load on the drives.
Lost an XZ at 110 hrs, bought a reman XZ and had the orig one rebuilt for a spare. Would like to try 5 blade Maximus, as I'm sure it will reduce slip a bunch and cruise speed should increase, but I am worried about the load on the drives.
