|
sorry I didn't post right away, came back from portland with a spun bearing on starboard engine do to my stupidity of storing my box anchor on top of the fuel line. skeek!!! B>O>A>T> bring out another ten grand. to answer some questions; the lake in the video is lake chelan Washington. elevation 300ft. above sea level, depth 1500ft. below sea level. cleanest water in the u.s. motors all dart 598s carbed. 750hp arnsens 30p 16.25 mercury props 4blade. picked up 27p,28p blades for when I get the engines rebuilt.
|
Found it........nice video Wes!
|
wish you could see the HD full length video.:food-smiley-007:
|
Originally Posted by jenks
(Post 2761240)
wish you could see the HD full length video.:food-smiley-007:
|
Originally Posted by jenks
(Post 2647530)
sorry I didn't post right away, came back from portland with a spun bearing on starboard engine do to my stupidity of storing my box anchor on top of the fuel line. skeek!!! B>O>A>T> bring out another ten grand. to answer some questions; the lake in the video is lake chelan Washington. elevation 300ft. above sea level, depth 1500ft. below sea level. cleanest water in the u.s. motors all dart 598s carbed. 750hp arnsens 30p 16.25 mercury props 4blade. picked up 27p,28p blades for when I get the engines rebuilt.
Wondering how you spun a bearing, by pinching the fuel line? I could see burning a piston.. What am I missing here? |
Lack of fuel, air in cooling system, hot oil and high RPM = squeeked 1 and 2 piston =spun bearing. SOL
|
| All times are GMT -5. The time now is 02:57 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.