feel under the step in the cuddy that's where the gas was pooling when my tank went bad
I contacted formula and they sent me the original plans for the fuel tank and they made it to Formulas specs I got mine here 3-4 years ago for around $650, good quality and I paint my mechanic to put it in he said it was a ***** to get out http://www.speedytanks.com/home.html |
Do u still have specs? If so can you email them to me
[email protected] |
Originally Posted by 88formula223
(Post 2988944)
feel under the step in the cuddy that's where the gas was pooling when my tank went bad
I contacted formula and they sent me the original plans for the fuel tank and they made it to Formulas specs I got mine here 3-4 years ago for around $650, good quality and I paint my mechanic to put it in he said it was a ***** to get out http://www.speedytanks.com/home.html |
If you're about to replace the tank you may want to check out this page where I documented the work I had to do after discovering that there was a big hole in my gas tank. See this page and especially the part on the leaking tank:
http://raffinaderiet.com/Formula/index.html |
Originally Posted by Klas233
(Post 3063588)
If you're about to replace the tank you may want to check out this page where I documented the work I had to do after discovering that there was a big hole in my gas tank. See this page and especially the part on the leaking tank:
http://raffinaderiet.com/Formula/index.html I just checked out that link...WOW Nice Job! Much better then new. You should link that to the upgrade post! I'm sure Formula People will want to see it! Dave |
Originally Posted by axapowell
(Post 3064317)
I just checked out that link...WOW Nice Job! Much better then new. You should link that to the upgrade post! I'm sure Formula People will want to see it!
Dave |
so what if i drop it in with no foam and strap it down.
http://i802.photobucket.com/albums/y...152PST2010.jpg |
Unless I missed Something .....What did you find on the old Tank? While the Job Klas233 did was Outstanding I'm not sure I like the idea of the tank being Supported by just the wood frame? The SS was a good Idea ...With Some of the Pounding my 311 takes I would want all the support I can get. Also the Original settup did last 28 years ......m
|
Billy, I found the original drawing for the tank. I will email it to you. You may also want to reinforce the hull bottom with pultrusion. If you like, give me a call at 260-724-1412. Scott
|
I got these from Scott at forumla.. Very helpful Guy. Tank is being custom made. Will update soon
http://i802.photobucket.com/albums/y...LSFueltank.jpg http://i802.photobucket.com/albums/y...S_223LSpdf.jpg |
All times are GMT -5. The time now is 11:05 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.