272 SR1 Help with gauges, cup holders quick please
 

I have an opportunity to replace all of my gauges and cup holders really, really cheap but I need some info asap!!

The boat is shrink wrapped and my memory is failing me.

I know there are 10 gauges total in the dash but what are they and what size?

I know 2 tachs, speedo, 2 oil pressure, 2 water temp, fuel....that is 8. What am I forgetting? 2 for voltage or 1?

And what else?

Are they 3 1/3 amd 2 1/8????

Last, factory cup holders....how many and what size????

HELP HELP HELP!!!!

I've got a 292 SR-1 and here is what I have:

2 - 6K Tachs
1- Speedo
2 - Fuel Pressure (0-30lbs.)
4 - Water Temperature
2 - Volt/Amps
1 - Gas Gauge

I also have 1 hour meter gauge near the ignition switches.

My gauges are 2" and the speedo and tachs are 3-3/8"

Hope that helps!

I would assunme your gauge sizing is probably the same...althought the layout sounds different....4 temp gauges?

Yeah...

I thought that was weird too.

I bought the boat as a full-on complete restoration so I never had it in the water but I did run it and all four gauges registered and were working.

I never checked to see what they were monitoring as of yet!

I have a 357 but the gauges should be the same. Just was looking at them last weekend. 3 3/8" for tach and spedo. 2 1/16" for the rest.

1 spedo
2 tachs
1 Fuel
2 volts
2 oil pressure
2 water temp
2 hour meter

There are 4 cup holders all of them are 3". 2 up front and 2 next to the back bench. Just measured them last week end.

Hope this helps.

Yes, I could have made a few guesses about the gauges bu tI had no idea on the cup holders.....Thanks

That is correct i just ordered all that from CP Performance, i also have a 357 -88

Pic of my 353 dash, hope it helps.

Hey, Markkua if you don't mind me asking, What brand of gauges and how much did you pay. I want to replace mine with autometers and was thinking of going with CP. Did you get free bazels with them?

Sorry, Baja226sport I don't mean to take over you thred, I'm just lazy:party-smiley-004:

Yes i did get the free bezels with the instruments,I did buy the Hardin marine black with red bezels,i think the price was $139 a set and you have to buy 2 sets,the hour meters did not include in the sets ,but CP has them also,i will try to send a picture soon.

Our old 272 (87) hope this helps..........

Thanks for the picrture....dop you know by chance what the gauges all were??

Just a thought, if you buy the tachs with the built in hour meters, you'll have 2 open spots for useful gauges like a couple oil temp or water pressure gauges. I'm replacing mine in the spring, going with oil temp for sure. '88 357

Yeah, I ended up doing that today. Bought the tachs with hr meters. So I will be adding oil temps like you said.....

I actually had them sitting there and forgot to actually add them to what I bought....damn it!!!

Guess I gotta go back!!!

I'm still trying to decide on the face color. What color did you go with? The black dash kinda limits your choices.

Yup :lolhit: Autometer

Thats what I plan to do with my gauges. I'm going to go with the Autometer Ultra Lites (silver colored). I think thay will look good with the black dash.

http://marine.autometer.com/CatalogG...il.aspx?gid=10

Thanks for the great pictures....got what I needed!!!

Who made the dash panel for you??

Norva plastic in Norfolk Va...........

Was that real carbon fiber? and do you remember a round about price???

No not real, carbon over 3/16 white plastic, I wanna say around $90 to $100. all 6 panels on the 382 was $290.00

Wow, that isn't bad. I think I was looking at about $400 from eddie marine for one panel. What did you have to do, send them your old panels?

I just took it to them. You should be able to take it to any plastic shop and have them made.

The other side !!!!

Thanks 382....your pics have been a great help....i am pretty sqaured away with the gauges now. Actually adding a few (oil temp).

I have one more question, I can get a great price on a nice shifter bezel.....does anyone know if thes twin engine controls (4 handle) are a standard size?

Or does anyone know the dimensions on the shifter that came in the 272???

I have a 1995 382 sr1 and need to replace my oil gauges because the mechanic said that when the engines were rebuilt it has American senders and the gauges I have are European. Can anyone help me on which are the ones I need and where to get them inexpensively?

Try starting a new thread on it