Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Formula (https://www.offshoreonly.com/forums/formula-36/)
-   -   How to get silent choice on a 98 Fastech (https://www.offshoreonly.com/forums/formula/253171-how-get-silent-choice-98-fastech.html)

Fountain4402 05-09-2011 08:30 AM

How to get silent choice on a 98 Fastech
 
Buddy and I are trying to figure this out. IF we take off the ST baffles we will have the normal two holes for through hull exhaust. At that point put 4in tips on it or whatever size they are. So at this point we would be at a thru hull exhaust loud all the time.

What about getting silent choice on it Because it doesnt have a Y pipe for exhaust to be diverted through the prop. Is there some solenoid that controls noise a little but still lets water and exhaust out. Or could you just add a Y pipe and get a normal corsa diverter and the exhause comes out like that.

boatnt 05-09-2011 09:03 AM

1 Attachment(s)
you will need to pull out engine/s to get y pipes in..

Fountain4402 05-09-2011 09:30 AM

isnt there a diverter you can use so you dont need to do the Y pipe and just go straight out the back,

Ted G 05-09-2011 09:34 AM

The diverter either dumps the exhaust into the Y pipe or out the back. So you will need the Y-pipe installed and then the diverters installed. It is much cheaper to put on full time mufflers out the back unless you just have to have wide open exhaust.

boatnt 05-09-2011 09:41 AM

1 Attachment(s)

Originally Posted by Fountain4402 (Post 3398332)
isnt there a diverter you can use so you dont need to do the Y pipe and just go straight out the back,

you will need a Y pipe and diverters.
in the picture you can see the diverters turning down to the y pipe


All times are GMT -5. The time now is 03:56 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.