![]() |
292 Top Speed
What are you 292 SR1 owners getting for top speed? I picked up an '89 with 330's and ordered a set of hydromotive Quad IV 24 pitch props. I'm hoping to see 62-63 with this combo. Is this wishful thinking or a realistic goal. All the info on here is about the 311 and I'm not finding much about the 292.
|
Come on guys! Nobody knows the performance of this boat with 330's?
|
Originally Posted by endeavour32
(Post 3405193)
What are you 292 SR1 owners getting for top speed? I picked up an '89 with 330's and ordered a set of hydromotive Quad IV 24 pitch props. I'm hoping to see 62-63 with this combo. Is this wishful thinking or a realistic goal. All the info on here is about the 311 and I'm not finding much about the 292.
A 420 TRS boat should run approx 68 |
Ive got a 272 w/ all stock 330hp's that will do 64 on gps spinning 23p quicksilvers (4900rpm). I am a little tall on rpm (I have only done it 3 times; supposed to be in the 42-4600 range) and would love to try some 24 and 25p props...
so I would think you should see at least 64-65mph |
My 1991 292sr1 with worked 502s does 77-80 mph gps.
26B1 props turning 5150 trimmed all the way out. |
I had a 90 292 with 365 mags, stainless marine exhaust 25" pitch 3 blade mirages and hit 70 gps on the best day in Florida winter. 66 in heat of summer I also added bob's nosecones as I had 89 Bravo 1 drives. The nose cones did help a little as I recall getting some blowout near 70
|
This summer I was able to get a GPS best of 63 MPH. That was with 330's and Hydromotive Q IV 24 pitch props at 4600 RPM's. I've got a set of Mag engines I'm going to modify to around 500 hp. I'd like to get into the high 70's maybe low 80's if possible.
|
You won't see low 80's unless you have @ 525hp or more.
High 70's is very possible with 475 - 500hp. Both set ups running Hydromotive Q IV 24p - 26p. You might also consider 2" Imco shorties before engine mods. They add 3-4 mph |
endeavour32 do you have any engine bay pics? curious how much room there is in front of motors compared to the 272
|
There's 10 inches of additional space measured from the timing covers to backside of the bench seat in the 292 SR1 vs 272 SR1 having B1's and BBlocks.
|
|
Originally Posted by 88242LS
(Post 3557364)
68-70 would be my guess. 502 mag = 415 hp right? |
Originally Posted by Car Biz
(Post 3557698)
68-70 would be my guess. 502 mag = 415 hp right?
|
Pretty sure those are non-efi's which I believe were 390hp
|
Originally Posted by cuposterchild
(Post 3558833)
Pretty sure those are non-efi's which I believe were 390hp
|
Originally Posted by 88242LS
(Post 3557364)
|
Originally Posted by mtgbiker
(Post 3559058)
70 - 72 mph (415hp) on a good day !
|
Originally Posted by 88242LS
(Post 3559031)
my 502 is a carb and its 415hp
|
ya do u know it
|
Originally Posted by 88242LS
(Post 3559140)
ya do u know it
Sorry just cleaned out my pm inbox. Try sending it again. |
| All times are GMT -5. The time now is 06:38 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.