Trim indicator range?
 

I replaced the trim indicator cables on my 382 because the old set was bustd when i bought the bought. I just had a chance to cycle them yesterday.

I have them on 0 when all the way up, but when you run them down they only go to 7.

is that right? I cant really adjust anything on them i dont think.

Normal?

From in to trimmed out does the dot go up or down? A picture would be good too!

they are the stock trim indicators. drives on the left tabs on the right 0-10

when the tabs are all the way up they sit at 0
when i run the tabs all the way down it stops at 7

normal?

anyone? you mean no one knows what their trim indicators read?

Mine read through the full range... Are you sure your trim limit switches are set to allow you full range of motion on the drives?

if i wasnt clear i am talking about the trim tabs. the drive indicators are fine.

I think mine only go to about 7 on the tabs. I'm pretty sure that's normal. The confusion was we thought you were talking about the drives.

Dave

yeah sorry bout that i re read what i posted and realized i wasnt clear about the tabs.

Thanks for the info i feel better now.

its normal...mine does this on the tabs and drives.

if your running more than 7 .....you got a problem ....m