![]() |
382's What props you runnin?
I;m dealin with an issue right now and im curious what everyone is runnin.
what props / power is everyone runnin on the 382's and the fastech's |
500 EFI's I run 28" Bravos, with that being said I want to move up to 30" and work with them to dial in better cruise speed.
Do a search there were a no# of prior discussions on this. Good Luck, JB |
jb.... 28 4 blades? how my hp are your efi's? what kidn of speeds are you seeing?
|
Stock 28 bravo 1's in my 1997 382 with tired hp's just bumped 70mph on a good day with a light load. Motors are fresh now and the lake is too low to test. hoping to get a few more mph and then tweak the props.
|
My (former) 2002 had 34P Bravos when I got it but after removing Prochargers and building 540's I ran 32P Bravos. I later went to 15 5/8 28P Maximus with similar results but better cruise speeds.
EDIT: Your boat is a 95 and a straight bottom. I'm willing to bet that drops pitch 2 points. |
ive got 4 blade 24p coming. i hope its enough, im reading alot of 26 and 28's under similar setups.
I jujst hope i can get by with these. |
A friends 06 382 with 496HO's spinning labbed 26's bumping the rev limiters, 5050rpm on a light load at 70.
|
04 with 525's,running 28 Bravo's,with a Bblades touch. I also have a set of 26 Maximus. Great mid range cruise,but just feel like they have to much bite.The 28 Bravos give up a mile or two midrange,but pick up 4 mph on the top end. 75-76 mph. Hope this helps.Jeff
|
Hydromotive 15.5" x 29 - 5 blades, I'm also have shorties...575 SCi's with intercoolers...estimated HP 625-650, best top speed 83 GPS.
|
My 28" Bravos are 4 blade and I push 72/73 @ 5400 rpms. I have only pushed her there twice since I bought her back in 05.
|
| All times are GMT -5. The time now is 02:02 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.