311 parting out
 

parting out a 311sr1. from the late 80's. it has good trim and windshield. feel free to post your needs and i will take a look and see if i have what you guys need. figure id take off whatever people could use before i drag it to the junk yard

how bad is it or what happened to it?

Any cushions from underneath that the foam would be good on? Looking at doing some custom seating in my 272 and just wondering if the foam could be robbed from a 311 to be used. Engine hatch, rear bench, benches in cabin, etc.

Hate to see a bird die.

5-6 years ago it had brand new interior put in it then it sat outside and now is full of water and the hull is a mess. i will take a peek at the cabin interior and let you know

what a shame, I'm thinking it was longer then 5/6 yrs ago thats when I saw it and I wanted the seats out of it but no one would go for it at the time

I just bought a 87' F-311 What color is the interior of the cockpit? Are the bolster seats in good shape? The entry to the cabin..is it the flip up hatch and swinging door? Im looking for a new hatch and possibly the door if the door is smoked black..mine is clear! is the cockpit cover indecent condition..mine isnt and do you have cockpit carpet? Could also use the compass..and if your dash is in better shape possibly that as well..let me know what you have thats good and we can go from there! What about engines and drives? I hate to see a bird die too but maybe yours can give mine life!

u buy the yellow one?

I would like a shoot at the bolsters let me know, what color.

Do you have a tie bar?

PM sent

pm sent

Hattehylle to the cabin door
 

Hi I am looking for the hatch on the cabin door. I have a Formula 1988 242 Formula, I am more or less sure tatt it is the same hatch on the 311

I am livling in Norway, but staying in Raleigh NC until sunday 13/5 would have been perfekt to take it home with me :-)

Do you have it, if so how much ?

Best regards

Rune

interested in mechanical trim indicators

what drives were on it?

sorry guys its been a hell of a weekend for me and i havent gotten to the boat to take pics. im going to try tomorrow or tuesday. got busy finishing and delivering a customers top gun.
will post pics soon

thanks

sold the bolsters years ago sam. the interior was not new 5 years ago, it's original from 88. the interior that was new 7 years ago is in a 41 velocity. i am going to part that one out too. i will get a few pics together and you guys can have at it. make me a reasonable offer and it's yours. you can buy the whole boat if you like, it's on an older eagle trailer. 88bullet is a friend of mine who is helping me get rid of this stuff so if you don't get a pm back from me right away i'm sure tim aka 88bullet will respond . thanks i do prefer to sell the whole thing

I need one "trim ring" for the rectangular cabin "port" windows to replace one that's broken on my '81 255 Liberator. Do you know if the windows are the same on yours as mine? I think they all used the same style from the late 70s through '86. It's black plastic with beveled holes for attaching screws and goes on the outside.

Jason...I bought all that stuff from a 255 "doner " boat out of New Jersey a few months ago. Let me see what I have and I'll get back.

is the boat in Wilson?

Looking for the black plastic trim that covers the screws which old down the window frame (I know you said 80s but I am looking for the trim from the curved glass windshield).

Thanks.

Jed

its a 88 311

I'm looking for the door latche for the head and the hole door in front of the fridge

I need the upper hatch that is above the cabin door. This is the piece that you need to raise in order to go in to the cabin. PM me the condition and price, also if you have the cabin table and decanters I would be interested in those as well.

Thanks

I need the windshield. Or just the starboad side curved glass if you have already sold pieces.

here are a couple pics i had sent to me quick. i will try to get some more of the cabin ect. soon

thanks
tim

couple more

2500 bucks takes the whole thing!!

I'll take the strainers and raw water system. All of the Formula emblems too Buckk

PMed you about the front glovebox panel and some more. Thanks

Do you have the tiebar for the lower units?

Please don't forget I sent you a pm about the lighted toggle switches. Does the boat have docking lights?
BC

here are a few pics. the boat has been sitting outside and the cabin has some water in it so interior is junk. let me know if you see anything you want in the pics

Hatches, strainers, for me :thankyouthankyou:

All the switches on the panel to the right of the steering column and the black plastic trim around the windshield please

[email protected]

I'm interested in the complete windshield, if you still have, price? email [email protected]

Dash
 

You guys seem to be doing some part-outs... Doesn't look like this boat has what I need but I'm looking for passenger side that will somewhat fit in with this...

https://sites.google.com/site/mitche...t/IMG_4580.JPG

The 41 Velocity maybe?

Tom

inerested in the exhaust tips on swim platform.

Is the steering wheel at all salvagable?

Still have this boat?? I would be interested in the stainless bow railing & the railing that goes around the engine hatch??

[email protected]