2013 Fastech 382 chrome switch part numbers
 

For those of you, like me, who may want to upgrade to the newer Chrome style switches.
Looks to be 11 sets.


I contacted Scott at Formula, his reply =>

These are the switches I pulled from parts issued to a 2013 382 FASTech:

45816 SWITCH CARLING BLOWER BLACK 383 13 8509 01/30/13 1.00 EA

45818 SWITCH CARLING COURTESY LT 383 13 8509 01/30/13 1.00 EA

45822 SWITCH CARLING PANEL LTS BL 383 13 8509 01/30/13 1.00 EA

45827 SWITCH CARLING BILGE PUMP B 383 13 8509 01/30/13 1.00 EA

45828 SWITCH CARLING DOCKING LT B 383 13 8509 01/30/13 1.00 EA

45830 SWITCH CARLING ENG HT BLACK 383 13 8509 01/30/13 1.00 EA

45831 SWITCH CARLING OUTDRV BLACK 383 13 8509 01/30/13 2.00 EA

45833 SWITCH CARLING TRMTB MDPDT 383 13 8509 01/30/13 2.00 EA

45836 SWITCH CARLING NAV/ANCHOR B 383 13 8509 01/30/13 1.00 EA



47852 SWITCH CARLNG BODY SPST OFF 383 13 8509 01/30/13 3.00 EA

47853 SWITCH CARLNG BODY DPST OFF 383 13 8509 01/30/13 1.00 EA

47854 SWITCH CARLING BODY DPMDT O 383 13 8509 01/30/13 5.00 EA

47855 SWITCH CARLING BODY DPDT ON 383 13 8509 01/30/13 2.00 EA



It looks like they replaced the old style Bennett rocker switches for the trim and drive with these newer Carling switches.

Chrome switch? Do you have a picture?

These are the same switches that have been around for a few years, but still nicer that the white ones on the older boats.

Mine haven't arrived yet so I can't take any photo's - yet - but here a the dash photo of a 2013 382 FASTech off the Internet.

anyone who know the price for that red dash-panels? i have a 353 fastech -2002 and i want to buy that.

regards/Marcus

Marcus-
Contact Steve Dunning at Innotech Products (314.432.1900)
He makes all new carbon fiber dash panels for Formula. I just had mine made out of black carbon fiber and it came out amazing...best carbon fiber I have seen. Trust me you will not be disappointed.

ok thanks for that... that looks amazing , what was the price for that? i hope he also could make it in blue carbone as the original formula also have ? :)


regards

Marcus: Are those chrome trim switches? If so, can you tell me where you got them? I have to have those, they are looking sweet. Love the black carbon fiber BTW. The contrast of the black and chrome really looks sharp. I had Steve do a red dash for my Fountain and it turned out incredible. He is a talent for sure.

Steve did mine,, would love the chrome switches,, will they work on a 98 312 I wonder

my problem is to get blue carbone panels,, but i think that problem is solved.. i just send a e-mail to steve and witing for answer.. i dont know where to buy crome sw, more that formula oem :)

regards/Marcus

where does one find such chrome switches to beatify the cockpit of one floating bird.
# please??:eekdrop:

I purchased the black/chrome carling switch covers direct from formula when I re-did my dash. They also sold me the chrome military style rocker switches for the drives/tabs/trailer. I would give formula a call and see what they have laying around. If I remember correctly the carling switch covers weren't too expensive...the chrome military rocker switch's, now that's a different story (like $65.00/rocker switch which is crazy for a tiny little switch).

That's correct , call Scott at Formula.

Scott has them in stock at present, as I just ordered mine before I started the thread.
I'll post some close up pictures when they arrive.

Just a heads up ....

" It looks like they replaced the old style Bennett rocker switches for the trim and drive with these newer Carling switches. " Steve

So if you want the trim switches like paaka, you will need to be very specific when you talk to Steve and order the older style.

The trim switches part numbers on the first post are the same style as all the other switches.
They are different to paakas trim switches.

I just ordered and received the roccker switches and bodys from Formula. Also got the chrome switches for drives and tabs (eliminating the trailer switch )
Does anyone know if installing the rocker switch covers and pulling them back out will damage them.
I want to get the panels redone at some point so ill need to pull them back out
Thanks

Shane,
I believe you should not have any difficulty removing the switches at a later date.
The wings on the side of the switches - where you see the jagged edge - just spring in to go in the appropriate sized hole.

I see no reason why you cannot take the dash off at a later date & compress both sides of the switch and pop them back out again.

http://i1278.photobucket.com/albums/...ps7866b1fb.jpg

Here are the pictures of the switch covers & horn.

Have you ever tried to take a photo of a mirrow?

In the first photo you can see my reflection from various angles,
Just shows how shiny these covers are.


http://i1278.photobucket.com/albums/...ps40e47e68.jpg

In this one I tried to get rid of me!
But you can still a reflection of a picture I have hanging on the wall behind me!
That square you see on the switches is just a reflection!

http://i1278.photobucket.com/albums/...ps8b31a529.jpg

Awsome
Thanks for the info. Will be getting new panels in a few weeks so Ill need to pull them out. Probably should have left the old ones in untill then.