Bolster Grab Bar
 

Anyone have a source for the rear Bolster Grab Bars in this pic?

[IMG]http://i705.photobucket.com/albums/w...ps55773402.jpg[/IMG]

I have a pair of these same exact ( Red/Black color and everything) seats from a 292 SR-1 McLeod Bolster Seats in my Formula 255 Liberator from a 292 SR-1. I wnt to complete the install with these bars.

Thanks

Wish I could help. Not letting mine go. Lol. Maybe the one gordon is parting. I'm still trying to buy a switch panel off Gordon.

I offered to buy the rear couch and hatch from Gordon's boat and never heard from him. I think he prefers to deal with locals.

I will attest to this: I have learned a lot about the workings of these seats recently...taking them apart to change the cables, buttons,etc.

I've been having trouble getting communication with him also. Just wierd because he's sent me stuff before. I actually already have the passenger side panels he let me borrow but since he's parting out I've tried to buy along with the trim switch panel and any panel around throttles. Some communication but very sparingly. Bizarre.


Mine are due to be rebuilt at some point soon. After I finish the bilge area. If it doesn't sell first. I'm asking too much for it on cl so I don't expect it to sell. Trying to finish upgrading my license.

Seems like all the good deals come at a bad time. Now that I am "Sack Deep" in finishing this 255, a 292 FasTech without power or drives has become available for a great price. With my power and drives that becomes an 80 MPH boat and my trailer will adapt with minor mods to carry it!! Oh well...so it goes!! LOL

Where is the 292? What year and price?

I`m trying to finish the deal with Gordon on the bolsters, just try to get a time down, headed up to Maine for a little salt water, water temp should be a refreshing 58*.:lolhit:

On a complete side note, every formula i have been inside, including mine with those grab bars have been loose. Is there a way to tighten them without tearing the bolster down?

I don`t have mine here right now but you should be able to reach them, my bolsters came out of a 272 and the bars I think my be a little big for my 242.

Yeah just lay on your back...... reach inside and tighten them