302 on ebay
 

Not mine but looked like a decent project depending on price you get it for.

http://m.ebay.com/itm?itemId=171218657108

Should be good for some rooster tails

Very cool! Wonder what it will sell for...

What's a kaama racing engine? What sort of manifolds are those? What's the big box on the back of the boat?

The valve covers are only Kaama covers the engines were never built by them. The manifolds also had Kaama stamped on them I can't remember who actually made them but they were only 3 inch. As far as the box I don't know what your talking about

I know the boat, transome is rotted out,stringers are questionable and it was sunk a few times, engine size am told by the mechanic that maintained it (prior to the current owner) is 420 hp

the boots on the KAAMA's have slight dry rot (can use as is), the drives are standard KAAMA's

The back of the boat is the standard as the 79 thru 85 formula (nothing different) which I think is the box that was referenced above

The fiberglass shines well and you can tell its been rack stored its while life

The cabin is in nice shape (below the bow) don't remember seeing (looked nice) any tears ir stains, carpet is clean and nice also

I tried getting it, but you know how it goes, the price was more than it was worth to me at the time (Last summer)

Vinal on the seats is getting hard , almost ready to crack

great project if you are prepared to re-transom it and put the drive lines back on ...would be cool when done,,,



Thats the scoop on it

i believe there hardin headers.

I have 2 sets plus all other parts for those engines. If someone is interested let me know.

Sunk more than once! I can only imagine the electrical issues on an 80s boat.

You're telling me this big 4" standoff box on almost the entire transom, with out the paint scheme, is on all 302s? Really?

http://i38.photobucket.com/albums/e1...pscb140eed.jpg

http://i38.photobucket.com/albums/e1...ps5e0a7a35.jpg

The smaller 233 formula has a transom that looks somewhat similar, so I wouldn't be too surprised if that is actually stock. It's been a while since I've seen the back of a 302, so not dead sure

looks stock

http://www.boats.com/boat-details/Fo...1#.UuA46BUo7IU

yes they are on all 302's If I could post pics id take a pic of mine with TRS's id post it and you would see it there too

Normally the paint would stop there if there was a fiberglass swim platform on it

thats the way the paint looks on my buddys 86 after we took off his platform

Yup

Yup that is stock.

The 255's are the same way.

[IMG]http://i705.photobucket.com/albums/w...9/DSC_0034.jpg[/IMG]

Here is the back of my 86 F302. Previous owner added the other graphics. I would like to remove or cover the add-on

http://s1352.photobucket.com/user/jd...tml?sort=6&o=6

correct model P-1000 basically suited for 500hp per side/cast aluminum header/with stainless tails