![]() |
Originally Posted by Shubx57
(Post 4311805)
Been talking to this guy all week. I think his is the boat I want.
|
I passed the red 357 on Norman almost everyday. She was going to need some work. Those motors haven't been turned over in a long time. Just saying, It was awesome but 10k over the next couple years was not out of line.
|
Originally Posted by [email protected]
(Post 4312418)
I passed the red 357 on Norman almost everyday. She was going to need some work. Those motors haven't been turned over in a long time. Just saying, It was awesome but 10k over the next couple years was not out of line.
That is kind of sad. That power package looked very enticing and looks to make up an awesome bird. Maybe someone can give it some TLC and we can see it run. I like the red graphics too. |
Well since the only Kamma boat I can find is the one listed above in CT I'm looking at it long and hard. I'm roughly 9 hours away from it by car so I'm going only by what the current owner says. Seems like a nice boat but he admitted slight rot in the rear bulkhead behind the fuel tank. States the stringers are good and he's gonna check under the front step going into the cabine for me. I'm not opposed to some woodworking just wanna know what I'm getting into before I buy. Any other suggestions for things to look for on a 311 sr1? Thanks guys.
|
Originally Posted by Shubx57
(Post 4315957)
Well since the only Kamma boat I can find is the one listed above in CT I'm looking at it long and hard. I'm roughly 9 hours away from it by car so I'm going only by what the current owner says. Seems like a nice boat but he admitted slight rot in the rear bulkhead behind the fuel tank. States the stringers are good and he's gonna check under the front step going into the cabine for me. I'm not opposed to some woodworking just wanna know what I'm getting into before I buy. Any other suggestions for things to look for on a 311 sr1? Thanks guys.
|
|
Buddy just listed his.....Super Clean Boat No Disappointments.
http://www.offshoreonly.com/classifi...r1-o62790.html |
Hey there is a project one at SeaBoard Marine in CT, KEY word PROJECT
|
Hello you might want to talk to a guy called Jeff Muehlhausen he knows a lot about kammas he was selling one not long ago. But it was not a 311 or 357 . But he might be able to steer you in the right direction. He owns Speed Shop Marine . Good luck with your search
|
I am selling my 1985 302 kaama with 1998 502MPI. 2011 Eagle custom trailer and a spare set of drives.
let me know if anyone is interested. https://scontent-atl3-1.xx.fbcdn.net...03194460_o.jpg https://scontent-atl3-1.xx.fbcdn.net...36924319_o.jpg https://scontent-atl3-1.xx.fbcdn.net...93130346_o.jpg |
| All times are GMT -5. The time now is 04:32 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.