Offshoreonly.com - Over propped/lugging question?

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- Formula (https://www.offshoreonly.com/forums/formula-36/)

- - Over propped/lugging question? (https://www.offshoreonly.com/forums/formula/328187-over-propped-lugging-question.html)

KMONEY306

07-07-2015 01:01 PM

Over propped/lugging question?

89 242 with a 454 mag. Running a 21p 4 blade stainless spinning 4600rpm trimmed out with a couple people and half tank. Been meaning to send it to bblades to do a little labbing and get the rpm up a couple hundred. When running a 23p 3 blade I'm around 4900 but I like the 4 blade cruise and hole shot. Motor says run between 4600-5000. Being at that bottom number am I hurting the motor at all? Thanks for any input

tpenfield

07-07-2015 03:03 PM

No . . .

Mr Maine

07-07-2015 05:32 PM

No you are not lugging if you are in the specified range although it would be faster and easier on the drive if you are closer to the top end of the range.

CC247

07-08-2015 08:07 AM

Quote:

Originally Posted by Mr Maine (Post 4326999)

No you are not lugging if you are in the specified range although it would be faster and easier on the drive if you are closer to the top end of the range.

+1 :whistle:

All times are GMT -5. The time now is 12:54 PM.